| 12.40.3300.000.11.1502 Standard 5 Slewing Ring Bearings | C:80 mm; dk:225 mm; B:105 mm; da max.:199 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Da min.:224.5 mm; Basic dynamic load rating C:1530 kN; Da max.:250.5 mm; Material constant KM:330; α:6 °; r1 min.:1.1 mm; b:13.5 mm; Basic static load rating C0:7650 kN; ra max.:1 mm; Specific static load factor K0:500 N/mm²; Mass plain bearing:18.5 kg; Sealing solution:Triple-lip seals; |
| 92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings | ra (max):3 mm; Fillet Radius/Chamfer:4 mm; Limiting Speed - Grease:1,900 rpm; Enclosure:Open; db (max):164 mm; Inside Ring Outside Diameter:167 mm; Static Load Rating:1,130,000 N; dd (min):184 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Da (max):262 mm; db (min):148 mm; Radial Clearance:0.100 to 0.145 mm; Limiting Speed - Oil:2,400 rpm; D:280 mm; d:130 mm; Dynamic Load Rating:840,000 N; |
| 161.28.1600.890.11.1503 Standard 5 Slewing Ring Bearings | da (min):69 mm; Limiting Speed - Grease:7,500 rpm; Static Load Rating:11,500 N; Configuration:Single Row; B:10 mm; Da (max):81 mm; Weight:0.125 kg; d:65 mm; Factor fo:16.2; Radial Clearance:0.023 to 0.043 mm; ra (max):0.6 mm; D:85 mm; Dynamic Load Rating:11,900 N; Fillet Radius/Chamfer:0.6 mm; Enclosure:Double Shield; Bore Type:Cylindrical Bore; |
| 191.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings | J min.:295.275 mm; Housing:SAW 520; da:87.313 mm; h:42.069 mm; PosiTrac Plus contact element:2 x B10724-102; Pa:18.1 kN; Da:180 mm; J max.:333.375 mm; H1:114.3 mm; J1:60.325 mm; Max. speed for PosiTrac Plus seal:1650 r/min; P90°:71.2 kN; P150°:40 kN; Labyrinth ring:2 x LOR 102; Ca:70.104 mm; ba:51.594 mm; A1:111.125 mm; S:4.763 mm; Cap bolt, SAE grade:8; PG:1/4 NPT; |
| 191.32.2240.990.41.1502 Standard 5 Slewing Ring Bearings | Weight:1.420 kg; Limiting Speed - Oil:6,700 rpm; B:39.7 mm; ra:1.5 mm; Snap Ring Width:2.5 mm; Fillet Radius/Chamfer:1.5 mm; da:54 mm; Static Load Rating:56,500 N; a (max):3.3 mm; Limiting Speed - Grease:5,000 rpm; Dx:108 mm; d:45 mm; Bore Type:Cylindrical Bore; Configuration:Double Row; D:100 mm; Cy:5.4 mm; Dynamic Load Rating:76,500 N; Enclosure:Snap Ring Groove wit; Snap Ring Outside Diameter:106.5 mm; |
| 11.50.4140.001.49.1502 Standard 5 Slewing Ring Bearings | B:50 mm; dk:66 mm; d:50 mm; h1:120 mm; l4 max.:180 mm; α:4 °; N1 max.:34 mm; d4 max.:60 mm; Mass rod end:3.8 kg; G:M 42x2; Material constant KM:330; l3 min.:57 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; d2 max.:110 mm; N max.:98 mm; Size bolt with internal hexagon:M 12; Basic static load rating C0:270 kN; Basic dynamic load rating C:156 kN; Tightening torque bolt with internal hexagon:79 N·m; |
| 92.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings | ra max.:1 mm; Specific static load factor K0:300 N/mm²; da max.:137.5 mm; Da max.:179 mm; da min.:129 mm; Material constant KM:330; Lubricant:Maintenance free &nd; C:90.475 mm; Da min.:166.5 mm; r1 min.:1 mm; d:120.65 mm; D:187.325 mm; b1:10 mm; Specific dynamic load factor K:150 N/mm²; b:11 mm; B:105.562 mm; Basic dynamic load rating C:1900 kN; Mass plain bearing:11.5 kg; M:8 mm; r2 min.:1.1 mm; |
| 191.20.1600.990.41.1502 Standard 5 Slewing Ring Bearings | Db (max):74 mm; D:90 mm; Limiting Speed - Grease:7,500 rpm; Dynamic Load Rating:62,500 N; db (min):38.5 mm; d:30 mm; ra1 (max):1.5 mm; Static Load Rating:55,000 N; ra (max):1.5 mm; Outside Ring Inside Diameter:73 mm; db (max):44 mm; Weight:0.750 kg; Fillet Radius/Chamfer:1.5 mm; Da (max):81.5 mm; Configuration:Single Row; dc (min):47 mm; da (min):38.5 mm; r1:1.5 mm; Limiting Speed - Oil:9,500 rpm; |
| 92.40.2395.991.41.1502 Standard 5 Slewing Ring Bearings | Limiting Speed - Grease:1,700 rpm; d:160 mm; Limiting Speed - Oil:2,000 rpm; Static Load Rating:1,050,000 N; Configuration:Single Row; ra1 (max):3 mm; ra (max):3 mm; Weight:34.100 kg; db (min):178 mm; Enclosure:Open; Radial Clearance:0.115 to 0.165 mm; Fillet Radius/Chamfer:4 mm; dc (min):211 mm; Dynamic Load Rating:860,000 N; db (max):200 mm; Da (max):322 mm; dd (min):228 mm; Bore Type:Cylindrical Bore; |
| 91.50.2842.990.41.1502 Standard 5 Slewing Ring Bearings | Appropriate attachment bolt size G:0.625 in; R2:21.431 mm; P150°:19.6 kN; Ca:57.785 mm; ba:40.481 mm; Da:140 mm; RG:3/8 NPT; A1:88.9 mm; R1:46.038 mm; P180°:23.1 kN; Max. speed for PosiTrac Plus seal:2600 r/min; H1:88.9 mm; J max.:279.4 mm; J min.:244.475 mm; N1:19.05 mm; H2:31.75 mm; Housing:FSAF 613; L:330.2 mm; P120°:21.8 kN; End plug (suffix Y):EPR 7; |
| No. | Brand | a | C | M | h | L | b | N | D |
| 11.40.2795.001.41.1502 | Standard 5 | 28.7 mm | - | - | - | - | - | - | 150 mm |
| 92.35.1802.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 280 mm |
| 62.50.2000.001.49.1504 | Standard 5 | 44.7 mm | - | - | - | - | - | - | 225 mm |
| 62.40.1700.008.29.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.40.2003.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 420.0000 mm |
| 121.40.5300.990.41.1502 | Standard 5 | - | 52 mm | - | - | - | - | - | 320 mm |
| 192.32.3550.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.30.2031.600.11.1503 | Standard 5 | - | - | - | 47.625 mm | 393.7 mm | - | - | - |
| 161.45.2510.890.11.1503 | Standard 5 | 3 mm | - | - | 19 mm | - | - | - | 25 mm |
| 192.40.3550.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.30.1607.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.35.2012.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 210 mm |
| 12.30.1800.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | 170.0000 mm |
| 12.50.3739.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | 820 mm |
| 192.32.2240.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 360 mm |
| 162.28.1500.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 120 mm |
| 92.35.2012.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 130 mm |
| 162.45.2366.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 130 mm |
| 92.50.2446.990.41.1502 | Standard 5 | - | - | - | - | - | 22.3 mm | - | 460 mm |
| 61.40.1600.009.29.1503 | Standard 5 | - | - | - | - | - | - | - | 250 mm |
| 121.32.3550.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 72.0000 mm |
| 61.40.1400.000.19.1504 | Standard 5 | - | - | - | - | 530 mm | - | - | - |
| 191.32.2800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 125.0000 mm |
| 12.45.2940.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | 560.0000 mm |
| 162.40.2368.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 200.0000 mm |
280.30.1475.013 Type 110/1600. Standard 5 Slewing Ring Bearings Video
Luoyang JCB Bearing Technology Company
Standard bearing type 110, Bearing with limited clearance. Without gear. Drawing No. ... 280.30.1475.013. 1455. 200. 1598. 1307 ... Typ 110/1600.1. -0.20 ...
WCB three row roller slewing ring bearing - SlideShare
1 3 5 6 2 4 Movability in every way We set a wide variety of. 16 Applications series 01, 03 17 Series 01 Double-row ball bearing Gearing types. 18 Applications ...
Rothe Erde Slewing Bearings - Rotek Inc.
006 thyssenkrupp Rothe Erde GmbH 016 Bearing types and sample applications ... Type 110/1400 ... 110/1600 − 0,30 mm ... 280.30.1475.013. Type 110/1600.0.
Rothe Erde® Slewing Bearings. - Yumpu
Except for Standard series KD 210, types 13 and 21. Table 1. Service Time. in Full Load ... 110/1600 –0.30 mm +0.30 mm ... 280.30.1475.013. Typ 110/1600.0.
280.30.1475.013 Type 110/1600.0 - 回转支承轴承
280.30.1475.013 Type 110/1600.0 ; 外形尺寸和重量 ; 重量(KG), 200 ; 滚道直径(Dl), 1455 ; 外径（D）(Da), 1598 ? 0,20 ; 内径(d)(d)(Di), 1307 + 0,20.
280.30.1400.013 Type 110/1600.0 Slewing Ring Bearings
280.30.1400.013 Type 110/1600.0 Slewing Ring Bearings ; Gear, Without gear ; Type, Ball ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 1305 mm.
Rothe Erde® Slewing Bearings.
KD 210 standard bearing types 21 and 110 ... 110/1300. –0.25 mm. +0.25 mm. Type 110/1400 ..... 110/1600. –0.30 mm. +0.30 mm ... 280.30.1475.013.194 pages
280.30.1475.013 Type 110/1600.0 转盘轴承
280.30.1475.013 Type 110/1600.0 转盘轴承 ; Internal Diameter On Inner Ring (dr), 1393 mm ; 整体轴承组件的高度(H), 90 mm ; 重量, 200 Kg ; Number Holes In Outer Ring ...
Rothe Erde® Slewing Bearings.
Except for Standard series KD 210, types 13 and 21 ... 110/1300. –0.25 mm. +0.25 mm. Type 110/1400 ..... 110/1600. –0.30 mm. +0.30 mm ... 280.30.1475.013.194 pages
Standard series KD 600 - StudyLib
Rothe Erde Slewing Bearings Bearing design types Basic information Pages 6 ... 1355 Typ 110/1500.0 186 1498 1207 280.30.1475.013 1455 Typ 110/1600.0 200 ...