| 161.36.1700.891.41.1503 Standard 5 Slewing Ring Bearings | Stabilizing ring:SR-28-0; H2:60.325 mm; Initial grease fill:481.95 g; J max.:434.975 mm; N1:28.575 mm; Appropriate attachment bolt size G:1 in; da:125.412 mm; L:511.175 mm; Mass pillow block:92.5 kg; P180°:127 kN; Cap bolt, SAE grade:8; J1:85.725 mm; A2:193.675 mm; h:51.594 mm; P60°:301 kN; S:4.763 mm; Eye bolt:2 x 3/8-16 UNC; Housing:SAFS 528; P120°:116 kN; R1:87.313 mm; |
| 121.32.4250.990.41.1502 Standard 5 Slewing Ring Bearings | s:30 mm; Ca:194 mm; A1:360 mm; Initial grease fill, 40%:12 kg; Taconite seal:2 x TK 84; N4 max.:30 mm; P180°:3200 kN; Q120°:4200 kN; ATK:528 mm; ba max.:203 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H1:360 mm; Locating ring:2 x FRB 22/620; Q150°:2400 kN; N1:42 mm; P150°:2500 kN; da:400 mm; bb:141 mm; Da:620 mm; H2:120 mm; |
| 191.50.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Groove Width:3.5 mm; ra (max):2.5 mm; Configuration:Single Row; Groove Diameter:183.6 mm; a (max):5.7 mm; Limiting Speed - Grease:3,600 rpm; Static Load Rating:107,000 N; Factor fo:13.3; Limiting Speed - Oil:4,300 rpm; Weight:4.910 kg; Enclosure:Open; B:43 mm; da (min):104 mm; Fillet Radius/Chamfer:3 mm; D:190 mm; Dynamic Load Rating:143,000 N; Da (max):176 mm; Bore Type:Cylindrical Bore; d:90 mm; |
| 92.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | Bore Type:Cylindrical Bore; r1:0.5 mm; Snap Ring Width:2.8 mm; Dynamic Load Rating:82,000 N; Factor fo:13.2; Cy (max):6.5 mm; Limiting Speed - Grease:5,400 rpm; Limiting Speed - Oil:6,300 rpm; Da (max):118 mm; D:130 mm; b (min):3.1 mm; Weight:1.700 kg; a (max):4.1 mm; d:60 mm; da (min):72 mm; Configuration:Single Row; D1 (max):125.2 mm; ra (max):2 mm; Enclosure:Single Shield with S; Static Load Rating:52,000 N; |
| 62.25.1455.575.11.1403 Standard 5 Slewing Ring Bearings | Factor fo:14.7; Enclosure:Open; Fillet Radius/Chamfer:0.3 mm; da (min):19 mm; Static Load Rating:2,550 N; Dynamic Load Rating:4,600 N; Da (max):28 mm; Configuration:Single Row; Radial Clearance:0.011 to 0.025 mm; B:7 mm; Limiting Speed - Oil:29,000 rpm; d:17 mm; D:30 mm; Limiting Speed - Grease:24,000 rpm; Weight:0.018 kg; Bore Type:Cylindrical Bore; ra (max):0.3 mm; |
| 12.25.1600.001.21.1503 Standard 5 Slewing Ring Bearings | Accessories:Two Shields; Basic Dynamic Radial Load Rating C:72800 N; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:53000 N; Sealed Speed Rating n3:4500 rpm; d:45.000 mm; Oil Speed Rating n2:6000 rpm; B:39.70 mm; Fillet Radius ra:1.50 mm; D:100.0000 mm; |
| 92.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | D:80.0000 mm; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.00 mm; d:40.000 mm; Basic Static Radial Load Rating Co:6950 N; Grease Speed Rating n1:8500 rpm; Basic Dynamic Radial Load Rating C:19900 N; B:18.00 mm; |
| 12.40.2950.001.41.1502 Standard 5 Slewing Ring Bearings | Pa:68.5 kN; Taconite seal:TER 154; Cap bolt recommended tightening torque:271.2 N·m; P150°:94.3 kN; J min.:549.275 mm; H2:79.375 mm; H:401.637 mm; P120°:107 kN; Ca:129.819 mm; J max.:619.125 mm; A2:339.725 mm; PG:1/4 NPT; Da:339.999 mm; R2:42.069 mm; Max. speed for Taconite seal:440 r/min; P60°:290 kN; da:174.625 mm; RG:1 NPT; L:711.2 mm; S:4.763 mm; |
| 11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings | Configuration:Single Row; Limiting Speed - Oil:4,800 rpm; ra (max):2 mm; dd (min):93 mm; D:140 mm; Enclosure:Open; Limiting Speed - Grease:4,000 rpm; r1:2.1 mm; d:65 mm; Radial Clearance:0.040 to 0.070 mm; ra1 (max):2 mm; Bore Type:Cylindrical Bore; db (min):77 mm; Fillet Radius/Chamfer:2.1 mm; Dynamic Load Rating:181,000 N; db (max):81 mm; dc (min):85 mm; Weight:2.550 kg; Da (max):128 mm; Static Load Rating:191,000 N; |
| 12.45.2940.000.19.1502 Standard 5 Slewing Ring Bearings | Fillet Radius ra:2.00 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:176000 N; B:49.20 mm; d:85.000 mm; Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:142000 N; Grease Speed Rating n1:2600 rpm; |
| No. | Brand | a | C | M | h | L | b | N | D |
| 62.40.1500.000.19.1504 | Standard 5 | - | - | - | - | 380 mm | - | 32 mm | - |
| 11.25.1800.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | 265.0000 mm |
| 12.40.2622.400.11.1502 | Standard 5 | - | 39 mm | - | - | - | - | - | - |
| 92.40.2199.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.45.3400.100.19.1502 | Standard 5 | - | - | - | - | - | - | - | 140 mm |
| 191.32.2240.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 100 mm |
| 12.40.2950.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.50.3567.001.49.1502 | Standard 5 | - | - | - | - | - | - | 8.8 mm | 115 mm |
| 12.25.1600.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | 100.0000 mm |
| 192.32.2240.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 360 mm |
| 162.36.1900.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 200 mm |
| 91.40.2395.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.35.2620.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 121.36.4750.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 24 mm |
| 12.35.2690.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | 480 mm |
| 11.35.2620.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | 230.0000 mm |
| 162.45.2510.890.11.1503 | Standard 5 | - | - | - | 20 mm | - | 40 mm | - | - |
| 191.32.2500.990.41.1502 | Standard 5 | - | - | - | 56.356 mm | - | - | - | - |
| 11.40.2619.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | 6.0000 in |
| 192.25.2800.990.41.1502 | Standard 5 | 1.75 mm | - | - | 61.5 mm | - | - | - | 75 mm |
| 161.28.1500.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | 340 mm |
62.40.1700.007.19.1503 Standard 5 Slewing Ring Bearings Video
19.1503 Status. |
19.1503 Status. (a) Status as an EDWOSB concern or WOSB concern eligible under the WOSB Program is determined in accordance with 13 CFR part 127.