| 92.35.1802.990.11.1502 Standard 5 Slewing Ring Bearings | Fillet Radius ra:1.00 mm; B:18.00 mm; Basic Static Radial Load Rating Co:27000 N; D:95.0000 mm; d:60.000 mm; Basic Dynamic Radial Load Rating C:30700 N; Grease Speed Rating n1:0 rpm; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:7400 rpm; |
| 11.40.3150.000.11.1502 Standard 5 Slewing Ring Bearings | Static Load Rating:39,500 N; B:22 mm; a (max):2.9 mm; ra (max):1 mm; Enclosure:Open; Limiting Speed - Oil:6,300 rpm; Groove Diameter:120.2 mm; Groove Width:3.1 mm; r1:0.5 mm; Configuration:Single Row; d:80 mm; D:125 mm; Cy (max):5.3 mm; Da (max):119 mm; Dynamic Load Rating:47,500 N; Weight:0.825 kg; Radial Clearance:0.025 to 0.051 mm; Bore Type:Cylindrical Bore; da (min):86 mm; Limiting Speed - Grease:5,300 rpm; |
| 91.30.1607.991.21.1502 Standard 5 Slewing Ring Bearings | dc (min):124 mm; r1:3 mm; D:200 mm; Limiting Speed - Oil:3,400 rpm; Static Load Rating:460,000 N; Fillet Radius/Chamfer:3 mm; Limiting Speed - Grease:2,600 rpm; Enclosure:Open; Dynamic Load Rating:370,000 N; db (max):119 mm; ra1 (max):2.5 mm; Weight:9.390 kg; d:95 mm; dd (min):134 mm; Radial Clearance:0.050 to 0.085 mm; Configuration:Single Row; db (min):109 mm; ra (max):2.5 mm; Bore Type:Cylindrical Bore; |
| 162.28.1700.890.11.1503 Standard 5 Slewing Ring Bearings | Limiting Speed - Oil:1,800 rpm; Static Load Rating:1,810,000 N; Axial Load Factor Y0:2.07; Dynamic Load Rating:1,490,000 N; Hole Diameter (do):8 mm; D:300 mm; B:96 mm; Radial Clearance:0.180 to 0.240 mm; Constant e:0.32; d:180 mm; Da (max):286 mm; Nr. of Holes:6; Enclosure:Open; ra (max):2.5 mm; Center Guidance:Fixed Inner Ring Rib; Limiting Speed - Grease:1,300 rpm; Axial Load Factor Y1:2.12; Axial Load Factor Y2:3.15; |
| 60.25.1455.500.11.1503 Standard 5 Slewing Ring Bearings | T:45.6 mm; N:12.3 mm; d:20 mm; J:63.5 mm; Fatigue load limit Pu:0.28 kN; A:30 mm; Recommended tightening torque for grub screw:4 N·m; L:86 mm; Mass bearing unit:0.31 kg; A3:3.2 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Thread grub screw G2:M6x0.75; Basic static load rating C0:6.55 kN; s1:26.6 mm; Da:68.3 mm; B:34.2 mm; |
| 192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings | R2:33.337 mm; P60°:226 kN; Mass pillow block:94.8 kg; Eye bolt:2 x 3/8-16 UNC; Da:279.999 mm; H2:66.675 mm; H1:169.875 mm; ba:68.263 mm; Max. speed for PosiTrac Plus seal:875 r/min; P180°:94.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Appropriate attachment bolt size G:1 in; RG:3/4 NPT; A2:222.25 mm; Ca:102.794 mm; Initial grease fill:793.8 g; Stabilizing ring:2 x 38151-36; |
| 62.40.1700.007.19.1503 Standard 5 Slewing Ring Bearings | S:0.794 mm; Mass bearing unit:19.7 kg; Limiting speed:2100 r/min; L:361.95 mm; H:213.519 mm; Basic dynamic load rating C:426 kN; J min.:254 mm; s:38.497 mm; Attachment bolt diameter G:25.4 mm; J max.:311.15 mm; da:100.013 mm; H2:63.5 mm; H1:104.775 mm; A:89.694 mm; B:80.169 mm; |
| 12.35.2690.001.41.1503 Standard 5 Slewing Ring Bearings | Configuration:Single Row; db (max):318 mm; d:260 mm; Da (max):458 mm; Limiting Speed - Grease:1,100 rpm; db (min):282 mm; D:480 mm; dc (min):323 mm; Enclosure:Open; Radial Clearance:0.190 to 0.260 mm; Static Load Rating:2,930,000 N; Fillet Radius/Chamfer:5 mm; Limiting Speed - Oil:1,300 rpm; dd (min):343 mm; B:130 mm; Bore Type:Cylindrical Bore; Inside Ring Outside Diameter:320 mm; Dynamic Load Rating:1,780,000 N; |
| 191.32.3150.990.41.1502 Standard 5 Slewing Ring Bearings | ra (max):0.3 mm; r1:0.3 mm; Limiting Speed - Grease:11,000 rpm; Da (max):56 mm; D1 (max):56.7 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:5,350 N; b (min):1 mm; Dx (min):61.5 mm; Configuration:Single Row; Snap Ring Outside Diameter:60.8 mm; d:45 mm; Factor fo:16.1; Radial Clearance:0.018 to 0.036 mm; a (max):1.3 mm; Fillet Radius/Chamfer:0.3 mm; da (min):47 mm; B:7 mm; Cy (max):1.8 mm; Snap Ring Width:0.9 mm; |
| 162.40.2240.890.11.1503 Standard 5 Slewing Ring Bearings | Mass pillow block:22.4 kg; Stabilizing ring:SR-18-15; J max.:295.275 mm; h:38.1 mm; N1:19.05 mm; PG:1/8 NPT; P180°:42.3 kN; Cap bolt:2 x 5/8-11 UNC; H:192.484 mm; P120°:38.3 kN; A1:98.425 mm; Cap bolt, SAE grade:5; Da:160 mm; R2:27.781 mm; Ca:49.809 mm; Labyrinth ring:2 x LOR 186; Initial grease fill:141.75 g; Housing:FSAF 518; ba:40.481 mm; S:4.763 mm; |