| 11.30.1734.001.41.1503 Standard 5 Slewing Ring Bearings | Configuration:Single Row; Bore Type:Cylindrical Bore; dd (min):419 mm; ra1 (max):4 mm; ra (max):4 mm; Enclosure:Open; Limiting Speed - Oil:1,200 rpm; Inside Ring Outside Diameter:390 mm; db (max):386 mm; Da (max):558 mm; Radial Clearance:0.145 to 0.225 mm; d:320 mm; Dynamic Load Rating:1,600,000 N; dc (min):393 mm; Fillet Radius/Chamfer:5 mm; Static Load Rating:2,390,000 N; D:580 mm; db (min):342 mm; |
| 161.36.1900.891.41.1503 Standard 5 Slewing Ring Bearings | H:157.162 mm; A2:123.825 mm; J max.:241.3 mm; End plug (suffix Y):EPR 6; Housing:FSAF 311; Labyrinth ring (db shaft position):LER 40; P120°:13.3 kN; Da:120 mm; ba:29.369 mm; H2:30.163 mm; J1:50.8 mm; Cap bolt:2 x 1/2-13 UNC; P60°:35.6 kN; Labyrinth ring (dc shaft position):LER 27; Initial grease fill:68.04 g; PG:1/8 NPT; Ca:52.807 mm; Bearing limiting speed:7500 r/min; P180°:14.2 kN; dc:52.375 mm; |
| 121.40.5000.990.41.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:26000 rpm; B:11.00 mm; Sealed Speed Rating n3:15000 rpm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:3400 N; D:35.0000 mm; Oil Speed Rating Open/Shielded n2:26000 rpm; d:10.000 mm; Basic Dynamic Radial Load Rating C:8060 N; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:20000 rpm; Grease Speed Rating n1:20000 rpm; |
| 162.36.1900.891.41.1503 Standard 5 Slewing Ring Bearings | Da (max):186 mm; D:200 mm; Configuration:Single Row; r1:3 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:3,200 rpm; Inside Ring Outside Diameter:121.5 mm; Static Load Rating:385,000 N; dd (min):134 mm; Limiting Speed - Grease:2,600 rpm; Fillet Radius/Chamfer:3 mm; Radial Clearance:0.050 to 0.085 mm; ra1 (max):2.5 mm; ra (max):2.5 mm; B:45 mm; db (min):109 mm; db (max):119 mm; d:95 mm; Dynamic Load Rating:335,000 N; |
| 12.40.2199.301.41.1502 Standard 5 Slewing Ring Bearings | Material constant KM:330; l4 max.:85.5 mm; d2 max.:55 mm; B:16 mm; Specific dynamic load factor K:100 N/mm²; d4 max.:25 mm; α:9 °; N1 max.:17 mm; Basic dynamic load rating C:30 kN; Basic static load rating C0:51 kN; N max.:55 mm; Mass rod end:0.4 kg; d:20 mm; Size bolt with internal hexagon:M 8; C1 max.:13 mm; Tightening torque bolt with internal hexagon:25 N·m; h1:58 mm; l3 min.:19 mm; |
| 191.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:4150 N; B:9.00 mm; Basic Dynamic Radial Load Rating C:6630 N; Accessories:Two Seals; Sealed Speed Rating n3:10000 rpm; d:25.000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:16000 rpm; D:42.0000 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; |
| 12.30.1630.000.11.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:14200 N; Accessories:Without Accessories; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:8500 N; d:17.000 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; D:47.0000 mm; B:14.00 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; |
| 91.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | Da:215.001 mm; P180°:107 kN; da:107.95 mm; PG:1/4 NPT; Stabilizing ring:SR-24-20; S:4.763 mm; Housing:SSAFS 524; PosiTrac Plus contact element:2 x B10724-113; L:419.1 mm; Labyrinth ring:2 x LOR 114; h:46.831 mm; A2:190.5 mm; P120°:94.3 kN; Pa:20.7 kN; Cap bolt, SAE grade:8; H2:53.975 mm; Initial grease fill:379.89 g; End plug (suffix Y):EPR 14; ba:53.181 mm; R1:79.375 mm; |
| 92.35.2012.990.11.1502 Standard 5 Slewing Ring Bearings | PosiTrac Plus contact element:2 x B10724-125; h:50.8 mm; Initial grease fill:623.7 g; Max. speed for PosiTrac Plus seal:1075 r/min; A1:158.75 mm; R1:95.25 mm; Eye bolt:2 x 3/8-16 UNC; P150°:80.1 kN; Cap bolt:4 x 3/4-10 UNC; Appropriate attachment bolt size G:1 in; J max.:463.55 mm; H:317.5 mm; J1:95.25 mm; J min.:431.8 mm; H2:63.5 mm; P120°:87.2 kN; N1:28.575 mm; Cap bolt, SAE grade:5; Labyrinth ring:2 x LOR 128; |
| 161.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:228 kN; Basic dynamic load rating C:236 kN; ra max.:2 mm; D1 ≈:126.35 mm; Mass bearing:3.27 kg; r3,4 min.:2.1 mm; Limiting speed:8500 r/min; B:35 mm; D:150 mm; d:70 mm; Da max.:137.5 mm; Fatigue load limit Pu:29 kN; d1 ≈:97.3 mm; F:89 mm; Calculation factor kr:0.23; Reference speed:4800 r/min; Limiting value e:0.2; Axial load factor Y:0.6; da min.:82 mm; r1,2 min.:2.1 mm; |
| No. | Brand | a | C | M | h | L | b | N | D |
| 12.35.2690.000.11.1503 | Standard 5 | - | - | - | - | 640 mm | - | - | - |
| 192.40.4500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 1168.4 mm |
| 162.36.1900.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 85 mm |
| 92.30.1607.991.21.1502 | Standard 5 | - | - | - | 35.719 mm | 330.2 mm | - | - | - |
| 191.40.3550.990.41.1502 | Standard 5 | - | - | - | - | 749.3 mm | - | - | - |
| 162.40.2368.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 200.0000 mm |
| 12.40.3300.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | 145.0000 mm |
| 162.40.2000.891.41.1503 | Standard 5 | - | - | - | 78 mm | - | - | - | - |
| 91.30.1799.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | 700 mm |
| 92.50.2446.990.41.1502 | Standard 5 | - | - | - | - | - | 22.3 mm | - | 460 mm |
| 161.45.2510.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 190 mm |
| 161.28.1400.891.21.1503 | Standard 5 | - | - | - | - | 355.6 mm | - | - | - |
| 191.50.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 140.0000 mm |
| 92.35.1802.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 280 mm |
| 12.30.2538.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | 75 mm |
| 62.30.1600.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | 480 mm |
| 11.25.1461.000.11.1503 | Standard 5 | 18.8 mm | - | - | - | - | 1.6 mm | - | 90 mm |
| 91.30.1607.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | 30 mm |
| 11.40.2915.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.40.2000.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 62 mm |
| 12.25.1600.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | 100.0000 mm |
| 161.36.1900.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 72 mm |
| 11.40.2240.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | 85 mm |
| 11.50.3167.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.35.1704.990.11.1502 | Standard 5 | - | 250 mm | - | - | - | 13.9 mm | - | 450 mm |
| 61.50.2355.001.49.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.30.1415.991.21.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.25.2800.990.41.1502 | Standard 5 | 1.75 mm | - | - | 61.5 mm | - | - | - | 75 mm |
92.35.1802.990.11.1502 Standard 5 Slewing Ring Bearings Video
091.35.1802.990.11.1502 Slewing Ring Bearings
091.35.1802.990.11.1502 Slewing Ring Bearings ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 1642 mm ; Outside Diameter Of Outer Ring, 2027.2 mm.
092.35.1802.990.11.1502 - Slewing Ring Bearings Manufacturers ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
091.35.1802.990.11.1502 bearing, Double row four point contact ...
091.35.1802.990.11.1502 Double row four point contact slewing bearings (External gear type) dimensions ; OD : 2027.2 mm. Outside diameter ; T(B) : 133 mm.