| 11.35.2620.001.41.1503 Standard 5 Slewing Ring Bearings | D:230.0000 mm; Basic Dynamic Radial Load Rating C:179000 N; Basic Static Radial Load Rating Co:216000 N; Fillet Radius ra:2.50 mm; d:130.000 mm; B:40.00 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Grease Speed Rating Open/Shielded n1:2100 rpm; Accessories:One Shield; |
| 12.40.2199.301.41.1502 Standard 5 Slewing Ring Bearings | Material constant KM:330; l4 max.:85.5 mm; d2 max.:55 mm; B:16 mm; Specific dynamic load factor K:100 N/mm²; d4 max.:25 mm; α:9 °; N1 max.:17 mm; Basic dynamic load rating C:30 kN; Basic static load rating C0:51 kN; N max.:55 mm; Mass rod end:0.4 kg; d:20 mm; Size bolt with internal hexagon:M 8; C1 max.:13 mm; Tightening torque bolt with internal hexagon:25 N·m; h1:58 mm; l3 min.:19 mm; |
| 191.25.2000.990.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:0.3 mm; Radial Clearance:0.013 to 0.028 mm; Static Load Rating:3,700 N; b (min):1 mm; B:9 mm; a (max):1.7 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:6,350 N; da (min):22 mm; r1:0.3 mm; Limiting Speed - Grease:19,000 rpm; Limiting Speed - Oil:23,000 rpm; Snap Ring Width:0.9 mm; Cy (max):2.3 mm; Configuration:Single Row; Dx (min):40.5 mm; ra (max):0.3 mm; Snap Ring Outside Diameter:39.8 mm; |
| 280.30.1475.013 Type 110/1600. Standard 5 Slewing Ring Bearings | Da (max):150 mm; Limiting Speed - Oil:4,300 rpm; Static Load Rating:315,000 N; Bore Type:Cylindrical Bore; Limiting Speed - Grease:3,600 rpm; Fillet Radius/Chamfer:2 mm; Dynamic Load Rating:242,000 N; ra (max):2 mm; d:90 mm; Configuration:Single Row; Enclosure:Open; B:40 mm; Radial Clearance:0.075 to 0.110 mm; D:160 mm; r1:2 mm; dc (min):109 mm; dd (min):116 mm; db (max):105 mm; ra1 (max):2 mm; Inside Ring Outside Diameter:107 mm; |
| 91.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:1000 rpm; Basic Dynamic Radial Load Rating C:242000 N; Sealed Speed Rating n3:0 rpm; d:380.000 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:1300 rpm; B:46.00 mm; Fillet Radius ra:2.00 mm; D:480.0000 mm; Basic Static Radial Load Rating Co:365000 N; |
| 191.32.2500.990.41.1502 Standard 5 Slewing Ring Bearings | da:214.313 mm; A1:203.2 mm; R2:42.862 mm; A2:285.75 mm; Eye bolt:2 x 1/2-13 UNC; Labyrinth ring:2 x LOR 550; Max. speed for PosiTrac Plus seal:640 r/min; P60°:364 kN; End plug (suffix Y):X-5217-4; P180°:145 kN; Housing:SAF 048 KA; h:56.356 mm; Pa:66.7 kN; Cap bolt:4 x 7/8-9 UNC; Initial grease fill:2154.6 g; J min.:571.5 mm; Da:359.999 mm; R1:122.237 mm; Ca:107.798 mm; P150°:120 kN; |
| 61.40.1600.008.19.1503 Standard 5 Slewing Ring Bearings | D:160.0000 mm; Grease Speed Rating n1:2400 rpm; Sealed Speed Rating n3:2400 rpm; B:52.40 mm; d:90.000 mm; Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:151000 N; Oil Speed Rating n2:3400 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:193000 N; |
| 61.50.2130.001.49.1504 Standard 5 Slewing Ring Bearings | Housing material:Cast iron; Basic dynamic load rating C:25.5 kN; N4:4 mm; s1:25.4 mm; J max.:133 mm; N1:14 mm; Basic static load rating C0:15.3 kN; Recommended tightening torque for grub screw:6.5 N·m; H2:19 mm; Mass bearing unit:1.55 kg; A5:22 mm; J min.:119 mm; Fatigue load limit Pu:0.655 kN; J:126 mm; A:45 mm; Housing:SY 507 M/VZ033; Thread grub screw G2:5/16-24 UNF; Hexagonal key size for grub screw N:3.969 mm; |
| 161.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:228 kN; Basic dynamic load rating C:236 kN; ra max.:2 mm; D1 ≈:126.35 mm; Mass bearing:3.27 kg; r3,4 min.:2.1 mm; Limiting speed:8500 r/min; B:35 mm; D:150 mm; d:70 mm; Da max.:137.5 mm; Fatigue load limit Pu:29 kN; d1 ≈:97.3 mm; F:89 mm; Calculation factor kr:0.23; Reference speed:4800 r/min; Limiting value e:0.2; Axial load factor Y:0.6; da min.:82 mm; r1,2 min.:2.1 mm; |
| 161.36.1900.891.41.1503 Standard 5 Slewing Ring Bearings | H:157.162 mm; A2:123.825 mm; J max.:241.3 mm; End plug (suffix Y):EPR 6; Housing:FSAF 311; Labyrinth ring (db shaft position):LER 40; P120°:13.3 kN; Da:120 mm; ba:29.369 mm; H2:30.163 mm; J1:50.8 mm; Cap bolt:2 x 1/2-13 UNC; P60°:35.6 kN; Labyrinth ring (dc shaft position):LER 27; Initial grease fill:68.04 g; PG:1/8 NPT; Ca:52.807 mm; Bearing limiting speed:7500 r/min; P180°:14.2 kN; dc:52.375 mm; |
| No. | Brand | a | C | M | h | L | b | N | D |
| 121.40.4500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 180 mm |
| 12.35.2690.000.11.1503 | Standard 5 | - | - | - | - | 640 mm | - | - | - |
| 12.50.2559.201.49.1502 | Standard 5 | - | - | - | 38.1 mm | - | - | - | - |
| 12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | 210 mm |
| 92.50.2446.990.41.1502 | Standard 5 | - | - | - | - | - | 22.3 mm | - | 460 mm |
| 12.30.1630.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | 47.0000 mm |
| 161.36.1900.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 72 mm |
| 161.28.1400.891.21.1503 | Standard 5 | - | - | - | - | 355.6 mm | - | - | - |
| 91.40.2395.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | 460.0000 mm |
| 91.40.2199.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 35.0000 mm |
| 12.35.2500.000.11.1503 | Standard 5 | - | - | - | - | 679.45 mm | - | - | - |
| 11.20.1385.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | 140 mm |
| 92.35.1802.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 280 mm |
| 162.28.1500.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | 200 mm |
| 191.50.5600.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 52 mm |
| 91.35.2012.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | 100 mm |
| 12.35.2690.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | 480 mm |
| 280.30.1475.013 Type 110/1600. | Standard 5 | - | - | - | - | - | - | - | 160 mm |
| 162.28.1600.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | 215.0000 mm |
| 192.40.3550.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.2619.001.41.1502 | Standard 5 | 16.993 mm | 19.05 mm | - | - | - | - | - | - |
| 91.30.1799.991.21.1502 | Standard 5 | - | - | - | - | 387.35 mm | - | - | - |
| 192.32.3150.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 62.0000 mm |
192.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings Video
192.40.4500.990.41.1502 thyssenkrupp rothe erde slewing
Buy 192.40.4500.990.41.1502 thyssenkrupp rothe erde slewing bearing from PT GREAT MACHINE ENGINEERING，Cylindrical roller slewing bearing
192.40.4500.990.41.1502 With internal gear - JCB Bearing
Page 1. Luoyang JCB Bearing Technology Co., Ltd
192.40.4500.990.41.1502 thyssenkrupp rothe erde slewing
Buy 192.40.4500.990.41.1502 thyssenkrupp rothe erde slewing bearing from CRANE SLEW RING PUBLIC BONDS & PROJECTS，Cross Roller Slew Bearing
Buy 192.40.4500.990.41.1502 Four-point contact ball slewing
Buy 192.40.4500.990.41.1502 Four-point contact ball slewing rings from EF SLEWING BEARING CO., LTD.，thyssenkrupp rothe erde slewing bearing
192.40.4500.990.41.1502 slewing ring bearings with ... - JCB Bearing
Page 1. Luoyang JCB Bearing Technology Co., Ltd
192.40.4500.990.41.1502 Rothe Erde Slewing Ring Bearings | Lily
We supply 192.40.4500.990.41.1502 slewing ring to customer according to Rothe Erde standard and specification, the quality of our product is same as original
Buy 192.40.4500.990.41.1502 Rothe erde slewing ring - SJC
Buy 192.40.4500.990.41.1502 Rothe erde slewing ring from SJC slewing bearing Inc，TIMKEN slewing bearing Distributor online Service suppliers
192.40.4500.990.41.1502 thyssenkrupp rothe erde slewing
Buy 192.40.4500.990.41.1502 thyssenkrupp rothe erde slewing bearing from RT BEARINGS PTV.LTD，thyssenkrupp rothe erde slewing bearing Distributor
192.40.4500.990.41.1502 Offshore Crane Slewing Bearing, 192.40
192.40.4500.990.41.1502 Offshore Crane Slewing Bearing 4128x4738x220-UWE 192.40.4500.990.41.1502 bearing,Seals Type:rubber,Material:50Mn,42CrMo
Buy 192.40.4500.990.41.1502 slewing rings without gear
Buy 192.40.4500.990.41.1502 slewing rings without gear from HongKong EVEN Slewing Bearing Co,.Ltd，RKS Series Slewing Bearing Distributor online