| 254KV3551 NSK Four-Row Tapered Roller Bearing | Basic Dynamic Radial Load Rating C:6370 N; Oil Speed Rating Open/Shielded n2:22000 rpm; d:20.000 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:3650 N; Grease Speed Rating Open/Shielded n1:18000 rpm; D:37.0000 mm; B:9.00 mm; Accessories:One Shield; Sealed Speed Rating n3:12000 rpm; |
| 749KV9951 NSK Four-Row Tapered Roller Bearing | d:85.000 mm; B:28.00 mm; Grease Speed Rating n1:4000 rpm; D:150.0000 mm; Oil Speed Rating n2:4800 rpm; Basic Dynamic Radial Load Rating C:48800 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:20800 N; |
| 355KV4901 NSK Four-Row Tapered Roller Bearing | Sealed Speed Rating n3:2800 rpm; Grease Speed Rating n1:4300 rpm; Oil Speed Rating n2:5000 rpm; d:75.000 mm; D:160.0000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:76500 N; Basic Dynamic Radial Load Rating C:114000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; B:37.00 mm; |
| 431KV6351 NSK Four-Row Tapered Roller Bearing | Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor f2C:1.05; B:20 mm; Preload class D GD:2400 N; r3,4 min.:0.6 mm; Static axial stiffness, preload class B:276 N/µm; rb max.:0.6 mm; Calculation factor f2B:1.02; Calculation factor f2D:1.08; Calculation factor f1:0.99; Preload class B GB:600 N; D1:97.7 mm; D:110 mm; da min.:76 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; |
| 519KV7351 NSK Four-Row Tapered Roller Bearing | J min.:260.35 mm; Da:160 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 5/8-11 UNC; J max.:298.45 mm; ba:34.925 mm; Bearing limiting speed:5300 r/min; Labyrinth ring:2 x LOR 188; RG:3/8 NPT; H:192.484 mm; H1:101.6 mm; P150°:40.5 kN; P180°:49.8 kN; Mass pillow block:21.3 kg; Pa:8.1 kN; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; H2:41.275 mm; |
| 280KV895 NSK Four-Row Tapered Roller Bearing | Da:130 mm; h:34.925 mm; Ca:55.804 mm; Taconite seal (dc shaft position):TER 33; N1:19.05 mm; R1:49.212 mm; RG:1/8 NPT; ba:30.956 mm; Stabilizing ring:2 x SR-1612; Max. speed for Taconite seal:1075 r/min; P120°:18.2 kN; H:161.925 mm; db:73.025 mm; A1:79.375 mm; L:285.75 mm; P180°:20 kN; P60°:49.4 kN; Housing:SAF 312; End plug (suffix Y):EPR 7; Mass pillow block:13.1 kg; |
| 304KV4153 NSK Four-Row Tapered Roller Bearing | Recommended tightening torque for grub screw:7.4 N·m; Limiting speed:850 r/min; Housing material:Cast iron; A1:14 mm; Da:119.1 mm; Recommended diameter for attachment bolts, mm G:14 mm; J7:33.5 mm; J6:123 mm; Hexagonal key size for grub screw N:3 mm; Db2:112 mm; A3:3.2 mm; B1:44 mm; T:50.5 mm; A:39 mm; d:42.862 mm; Basic dynamic load rating C:33.2 kN; Housing:FY 509 M/VZ033; L:137 mm; Recommended diameter for attachment bolts, inch G:0.5625 in; |
| 340KV81 NSK Four-Row Tapered Roller Bearing | Recommended diameter for attachment bolts, mm G:12 mm; d:35 mm; Fatigue load limit Pu:0.655 kN; N:14.8 mm; A1:17 mm; J:92 mm; Limiting speed:5300 r/min; Thread grub screw G2:M6; Da:106.4 mm; T:45.3 mm; Basic static load rating C0:15.3 kN; Hexagonal key size for grub screw N:3 mm; L:118 mm; A:35 mm; Basic dynamic load rating C:25.5 kN; Housing material:Composite; A3:3.2 mm; s1:24.3 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| 300KV4201 NSK Four-Row Tapered Roller Bearing | PosiTrac Plus contact element:2 x B10724-117; ba:57.944 mm; Stabilizing ring:SR-26-0; R1:79.375 mm; R2:36.513 mm; P60°:308 kN; S:4.763 mm; H2:60.325 mm; Pa:24.9 kN; H:292.1 mm; Eye bolt:2 x 3/8-16 UNC; P150°:118 kN; PG:1/4 NPT; Ca:73.812 mm; RG:1/2 NPT; A1:130.175 mm; L:466.725 mm; H1:152.4 mm; A2:203.2 mm; da:112.713 mm; |
| 335KV4651 NSK Four-Row Tapered Roller Bearing | Recommended tightening torque:4.2 N·m; h:2 mm; d3:50 mm; G:M 30x1.5; Grub (set) / Locking screw size:M 4; b:5 mm; d5:49 mm; d1:48 mm; Associated spanner (Hook spanner in accordance with DIN 1810):HN 5-6; Mass:0.2 kg; B:20 mm; |