| 2THR94722 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B1:155 mm; d1:240 mm; d:260 mm; G:Tr 280x4; G1:23 mm; B2:161 mm; Hydraulic nut:HMV 56 E; A:9 mm; Mass withdrawal sleeve:13.5 kg; G2:G 1/4; |
| SKF 353152 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Calculation factor Y:1.5; C:27 mm; Ca min.:4 mm; d1 ≈:90.3 mm; Fatigue load limit Pu:22.8 kN; ra max.:2 mm; T:32.75 mm; Da max.:111.5 mm; r1,2 min.:2 mm; Reference speed:4500 r/min; Da min.:104 mm; Dimension series:3EC; da max.:76 mm; Mass bearing:1.51 kg; Basic dynamic load rating C:186 kN; Db min.:115 mm; D:120 mm; db min.:75.5 mm; B:31 mm; Basic static load rating C0:193 kN; |
| 829784 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:260 kN; Fatigue load limit Pu:28.5 kN; d:400 mm; da min.:446 mm; H:48 mm; Limiting speed:1200 r/min; Reference speed:850 r/min; D:480 mm; Basic static load rating C0:1630 kN; Minimum load factor A:14; D1 ≈:403 mm; Da max.:434 mm; d1 ≈:477 mm; ra max.:2 mm; r1,2 min.:2 mm; Mass bearing (including seat washer where applicable):16.5 kg; |
| NTN CRTD7612 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d2:97.9 mm; Calculation factor (single, tandem) Y0:0.38; Preload class A GA:260 N; C1:9.3 mm; C3:3 mm; Calculation factor f2B:1.04; d1:101 mm; Calculation factor (single, tandem) X2:0.41; Preload class C GC:1560 N; da min.:96 mm; B:18 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Number of balls z:24; d:90 mm; Ball diameter Dw:11.112 mm; r1,2 min.:1.1 mm; D:125 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; |
| NSK160TFD2201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Bore Type:Cylindrical Bore; Da (max):672 mm; r1:6 mm; Static Load Rating:2,860,000 N; db (max):532 mm; ra1 (max):5 mm; ra (max):5 mm; Configuration:Single Row; d:480 mm; dc (min):541 mm; db (min):508 mm; Radial Clearance:0.220 to 0.330 mm; Enclosure:Open; Fillet Radius/Chamfer:6 mm; B:100 mm; Weight:135.000 kg; Dynamic Load Rating:1,620,000 N; Limiting Speed - Grease:780 rpm; D:700 mm; Limiting Speed - Oil:950 rpm; |
| 52474 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | F:60 mm; d:50 mm; Mass inner ring:0.18 kg; r, r1,2 min.:1.1 mm; B:28 mm; |
| FAG 547482 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Roller Profile:Symmetric; Da (max):166 mm; Fillet Radius/Chamfer:3 mm; D:180 mm; Limiting Speed - Oil:3,400 rpm; Retainer Material:Pressed Steel; Constant e:0.33; Axial Load Factor Y2:3.00; Limiting Speed - Grease:2,600 rpm; ra (max):2.5 mm; Radial Clearance:0.110 to 0.140 mm; Axial Load Factor Y1:2.02; Groove Width A:11 mm; Bore Type:Tapered Bore; d:85 mm; da (min):99 mm; Center Guidance:Floating Steel Ring; |
| NTN CRTD8801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:47 mm; Bore Type:Cylindrical Bore; Outside Ring Inside Diameter:185.5 mm; d:100 mm; db (min):114 mm; Limiting Speed - Oil:3,400 rpm; db (max):125 mm; Da (max):201 mm; Db (min):201 mm; Dynamic Load Rating:300,000 N; Fillet Radius/Chamfer:3 mm; ra (max):2.5 mm; dc (min):132 mm; da (min):114 mm; Db (max):190 mm; Limiting Speed - Grease:2,800 rpm; D:215 mm; Radial Clearance:0.075 to 0.110 mm; ra1 (max):2.5 mm; |
| NSK 220TFD3001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass pillow block:342 kg; J min.:628.65 mm; P90°:414 kN; Cap bolt recommended tightening torque:4284.4 N·m; Ca:117.805 mm; H1:241.3 mm; J1:133.35 mm; J max.:708.025 mm; Eye bolt:2 x 1/2-13 UNC; H:473.075 mm; R2:46.831 mm; Cap bolt:1 1/2-6 UNC; N1:41.275 mm; Da:399.999 mm; Housing:SAFS 052 KA; h:69.85 mm; Initial grease fill:2749.95 g; Labyrinth ring:2 x LOR 553; ba:96.838 mm; P150°:236 kN; |
| 547720Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass rod end:0.65 kg; Basic dynamic load rating C:48 kN; w:30 mm; Basic static load rating C0:90 kN; dk:35.5 mm; r1 min.:0.6 mm; G:M 24x2; d4 ≈:35 mm; C1 max.:18 mm; d2 max.:65 mm; l3 min.:36 mm; Material constant KM:330; l5 ≈:18 mm; B:20 mm; h1:94 mm; l4 max.:128 mm; α:7 °; Specific dynamic load factor K:100 N/mm²; l7 min.:30 mm; d:25 mm; |