| 82999 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da (max):186 mm; Fillet Radius/Chamfer:3 mm; r1:3 mm; D:200 mm; Bore Type:Cylindrical Bore; Radial Clearance:0.075 to 0.110 mm; dd (min):134 mm; Limiting Speed - Oil:3,200 rpm; Configuration:Single Row; B:45 mm; Enclosure:Open; ra1 (max):2.5 mm; d:95 mm; Limiting Speed - Grease:2,600 rpm; Static Load Rating:385,000 N; Inside Ring Outside Diameter:121.5 mm; db (max):119 mm; db (min):109 mm; dc (min):124 mm; |
| 2THR765613 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | db (min):382 mm; Weight:68.800 kg; ra (max):4 mm; ra1 (max):4 mm; Limiting Speed - Grease:1,100 rpm; Enclosure:Open; Bore Type:Cylindrical Bore; Da (max):518 mm; D:540 mm; Static Load Rating:1,830,000 N; db (max):401 mm; Configuration:Single Row; B:82 mm; Fillet Radius/Chamfer:5 mm; Radial Clearance:0.190 to 0.280 mm; dc (min):410 mm; d:360 mm; Dynamic Load Rating:1,110,000 N; r1:5 mm; Limiting Speed - Oil:1,300 rpm; |
| FAG 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B4:26 mm; Mass adapter sleeve assembly:7.1 kg; d:150 mm; Hydraulic nut:HMV 30 E; B1:139 mm; d3:195 mm; B:24 mm; d1:131.762 mm; G:M 150x2; |
| 522837 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | PG:1/4 NPT; Initial grease fill:3515.4 g; Da:419.999 mm; P180°:267 kN; P90°:400 kN; J1:139.7 mm; L:869.95 mm; Cap bolt, SAE grade:8; Housing:SAFS 056 KAUA; Cap bolt recommended tightening torque:4284.4 N·m; Eye bolt:2 x 1/2-13 UNC; Stabilizing ring:2 x A8819; Pa:89 kN; Ca:147.803 mm; J max.:749.3 mm; End plug (suffix Y):X-5217-2; R2:50.8 mm; Max. speed for Taconite seal:310 r/min; P150°:222 kN; |
| 829252 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Ca:153.797 mm; R2:46.831 mm; J max.:708.025 mm; End plug (suffix Y):EPR 23; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:5; Mass pillow block:284 kg; S:4.763 mm; P180°:173 kN; ba:107.95 mm; L:831.85 mm; P60°:423 kN; Max. speed for Taconite seal:385 r/min; A2:368.3 mm; Pa:95.2 kN; P120°:160 kN; H:474.663 mm; P150°:145 kN; H2:95.25 mm; Housing:SAW 544; |
| 549701 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra (max):2 mm; Constant e:0.28; da (min):82 mm; B:35 mm; Dynamic Load Rating:305,000 N; Center Guidance:Fixed Inner Ring Rib; Groove Width A:6 mm; D:150 mm; Hole Diameter (do):3 mm; Bore Type:Tapered Bore; Limiting Speed - Grease:4,500 rpm; Axial Load Factor Y1:2.45; Limiting Speed - Oil:6,000 rpm; Configuration:Double Row; d:70 mm; Da (max):138 mm; Axial Load Factor Y0:2.39; Enclosure:Open; Static Load Rating:268,000 N; |
| SKF 351121C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:34000 kN; da min.:928 mm; d:900 mm; Fatigue load limit Pu:2040 kN; Calculation factor e:0.27; D:1280 mm; r1,2 min.:7.5 mm; ra max.:6 mm; B:375 mm; Calculation factor Y2:3.7; Mass bearing:1515 kg; d2 ≈:1024 mm; Calculation factor Y1:2.5; Calculation factor Y0:2.5; b:69.1 mm; Basic dynamic load rating C:16215 kN; D1 ≈:1164 mm; Reference speed:20 r/min; Da max.:1252 mm; |
| FAG 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:460 mm; D:560 mm; Reference speed:700 r/min; Da max.:503 mm; Minimum load factor A:11; d1 ≈:556 mm; r1,2 min.:2.1 mm; Basic dynamic load rating C:242 kN; da min.:517 mm; H:60 mm; Mass bearing (including seat washer where applicable):29.5 kg; D1 ≈:464 mm; Fatigue load limit Pu:25 kN; Limiting speed:950 r/min; ra max.:2 mm; Basic static load rating C0:1430 kN; |
| 52372 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Enclosure:Single Shield with S; Static Load Rating:2,390 N; Snap Ring Outside Diameter:31 mm; Configuration:Single Row; Da (max):26 mm; Dynamic Load Rating:5,100 N; da (min):14 mm; D:28 mm; Fillet Radius/Chamfer:0.3 mm; Weight:0.024 kg; Factor fo:13.5; b (min):0.9 mm; Radial Clearance:0.011 to 0.025 mm; D1 (max):26.7 mm; Limiting Speed - Oil:32,000 rpm; Cy (max):1.9 mm; r1:0.3 mm; B:8 mm; d:12 mm; |
| NSK 300TFD4201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | PG:1/4 NPT; dc:174.625 mm; End plug (suffix Y):EPR 21; Labyrinth ring (db shaft position):LOR 165; A2:254 mm; H1:190.5 mm; Cap bolt:1-8 UNC; Labyrinth ring (dc shaft position):LOR 154; Da:319.999 mm; P150°:113 kN; Housing:SSAFS 236; Pa:73.4 kN; S:4.763 mm; R2:41.275 mm; Cap bolt recommended tightening torque:1220 N·m; ba:75.406 mm; L:679.45 mm; Stabilizing ring:SR-36-30; A1:180.975 mm; Ca:95.809 mm; |