| FAG 524194 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Hole Diameter (do):20 mm; Limiting Speed - Grease:420 rpm; Weight:468.000 kg; d:560 mm; Axial Load Factor Y1:2.21; Limiting Speed - Oil:520 rpm; Constant e:0.31; Retainer Material:Machined Brass; Da (max):792 mm; Enclosure:Open; Axial Load Factor Y0:2.16; Roller Profile:Symmetric; ra (max):5 mm; Configuration:Double Row; Axial Load Factor Y2:3.29; da (min):588 mm; B:258 mm; Groove Width A:45 mm; D:820 mm; |
| 530852 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static Load Rating:735,000 N; Da (max):262 mm; Radial Clearance:0.060 to 0.105 mm; Limiting Speed - Grease:1,900 rpm; D:280 mm; Bore Type:Cylindrical Bore; db (max):164 mm; Dynamic Load Rating:615,000 N; ra (max):3 mm; Configuration:Single Row; r1:4 mm; dc (min):169 mm; Enclosure:Open; db (min):148 mm; Fillet Radius/Chamfer:4 mm; B:58 mm; dd (min):184 mm; d:130 mm; Limiting Speed - Oil:2,400 rpm; Weight:18.500 kg; |
| FAG 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:460 mm; D:560 mm; Reference speed:700 r/min; Da max.:503 mm; Minimum load factor A:11; d1 ≈:556 mm; r1,2 min.:2.1 mm; Basic dynamic load rating C:242 kN; da min.:517 mm; H:60 mm; Mass bearing (including seat washer where applicable):29.5 kg; D1 ≈:464 mm; Fatigue load limit Pu:25 kN; Limiting speed:950 r/min; ra max.:2 mm; Basic static load rating C0:1430 kN; |
| 2THR55 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | s:25.4 mm; H2:33.337 mm; A1:77.787 mm; L:187.325 mm; d2:68.659 mm; H:109.537 mm; Mass bearing unit:3.65 kg; Limiting speed:1600 r/min; Basic dynamic load rating C:77 kN; S:0.794 mm; J max.:152.4 mm; A:58.737 mm; B:73.025 mm; H1:53.975 mm; da:44.45 mm; Attachment bolt diameter G:12.7 mm; J min.:131.762 mm; |
| 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Hole Diameter (do):20 mm; Static Load Rating:9,800,000 N; Axial Load Factor Y0:1.82; Fillet Radius/Chamfer:6 mm; Roller Profile:Symmetric; Configuration:Double Row; Weight:383.000 kg; Radial Clearance:0.300 to 0.400 mm; Dynamic Load Rating:7,500,000 N; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y2:2.77; Da (max):652 mm; Constant e:0.36; Groove Width A:40 mm; Retainer Material:Machined Brass; |
| SKF 351100C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static Load Rating:41,000 N; ra (max):1 mm; b (min):1.9 mm; Fillet Radius/Chamfer:1.1 mm; D:165 mm; Dynamic Load Rating:37,000 N; Bore Type:Cylindrical Bore; Snap Ring Outside Diameter:171.5 mm; r1:0.5 mm; da (min):136 mm; D1 (max):161.8 mm; Enclosure:Single Shield with S; Weight:0.815 kg; Snap Ring Width:1.7 mm; Factor fo:16.1; Limiting Speed - Grease:3,700 rpm; B:18 mm; Radial Clearance:0.018 to 0.048 mm; |
| FAG 528294 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Groove Width A:40 mm; Axial Load Factor Y0:2.08; Bore Type:Tapered Bore; Axial Load Factor Y1:2.13; Dynamic Load Rating:7,150,000 N; Fillet Radius/Chamfer:6 mm; Limiting Speed - Grease:510 rpm; Roller Profile:Symmetric; Static Load Rating:10,000,000 N; Da (max):692 mm; Limiting Speed - Oil:640 rpm; Axial Load Factor Y2:3.17; Radial Clearance:0.330 to 0.440 mm; Hole Diameter (do):20 mm; Configuration:Double Row; |
| 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Weight:52.700 kg; Groove Width A:22 mm; Configuration:Double Row; Hole Diameter (do):10 mm; ra (max):3 mm; Limiting Speed - Grease:1,000 rpm; Center Guidance:Fixed Inner Ring Rib; Roller Profile:Symmetric; Axial Load Factor Y2:4.15; Bore Type:Tapered Bore; d:280 mm; B:106 mm; Axial Load Factor Y1:2.79; Radial Clearance:0.300 to 0.390 mm; Static Load Rating:2,720,000 N; Retainer Material:Machined Brass; |
| 526400Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Cap bolt, SAE grade:8; Stabilizing ring:SR-34-0; h:54.769 mm; Eye bolt:2 x 3/8-16 UNC; Da:309.999 mm; R2:37.306 mm; P120°:127 kN; A2:309.575 mm; da:152.4 mm; PG:1/4 NPT; R1:115.888 mm; S:4.763 mm; Taconite seal:TER 141; H1:179.4 mm; Mass pillow block:168 kg; End plug (suffix Y):EPR 18; P90°:207 kN; Cap bolt recommended tightening torque:1220 N·m; Cap bolt:1-8 UNC; P180°:133 kN; |
| SKF BFDB353204 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Enclosure:Snap Ring Groove wit; Cy (max):4.7 mm; Dx (min):157 mm; Weight:0.846 kg; Snap Ring Width:1.7 mm; ra (max):1 mm; Static Load Rating:38,500 N; da (min):116 mm; Radial Clearance:0.036 to 0.066 mm; Configuration:Single Row; D:150 mm; d:110 mm; D1 (max):147.6 mm; B:20 mm; Fillet Radius/Chamfer:1.1 mm; b (min):1.9 mm; Factor fo:16.4; Limiting Speed - Grease:4,300 rpm; Dynamic Load Rating:38,000 N; |