| 549701 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra (max):2 mm; Constant e:0.28; da (min):82 mm; B:35 mm; Dynamic Load Rating:305,000 N; Center Guidance:Fixed Inner Ring Rib; Groove Width A:6 mm; D:150 mm; Hole Diameter (do):3 mm; Bore Type:Tapered Bore; Limiting Speed - Grease:4,500 rpm; Axial Load Factor Y1:2.45; Limiting Speed - Oil:6,000 rpm; Configuration:Double Row; d:70 mm; Da (max):138 mm; Axial Load Factor Y0:2.39; Enclosure:Open; Static Load Rating:268,000 N; |
| 2THR524012 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Axial Load Factor Y2:2.53; da (min):164 mm; d:150 mm; Fillet Radius/Chamfer:3 mm; Radial Clearance:0.130 to 0.180 mm; Dynamic Load Rating:1,320,000 N; Axial Load Factor Y1:1.70; Bore Type:Tapered Bore; D:270 mm; Static Load Rating:1,530,000 N; Da (max):256 mm; Roller Profile:Asymmetric; Limiting Speed - Oil:2,700 rpm; Hole Diameter (do):8 mm; Retainer Material:Machined Brass; B:96 mm; Constant e:0.40; |
| FAG 579703 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1,2 min.:4 mm; d:850 mm; H:90 mm; D1 ≈:855 mm; Minimum load factor A:240; Basic dynamic load rating C:761 kN; Reference speed:380 r/min; Limiting speed:560 r/min; da min.:936 mm; Mass bearing (including seat washer where applicable):115 kg; d1 ≈:995 mm; Da max.:914 mm; Fatigue load limit Pu:83 kN; ra max.:3 mm; Basic static load rating C0:6800 kN; D:1000 mm; |
| SKF 351761A DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:180 mm; Configuration:Single Row; dd (min):255 mm; Inside Ring Outside Diameter:232 mm; ra (max):3 mm; dc (min):235 mm; db (min):198 mm; Static Load Rating:1,150,000 N; B:75 mm; Limiting Speed - Grease:1,500 rpm; Enclosure:Open; Bore Type:Cylindrical Bore; D:380 mm; ra1 (max):3 mm; Radial Clearance:0.075 to 0.125 mm; Dynamic Load Rating:9,050,000 N; r1:4 mm; Fillet Radius/Chamfer:4 mm; db (max):227 mm; |
| FAG 545936 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Enclosure:Double Shield; ra (max):1 mm; Configuration:Single Row; Weight:0.106 kg; B:14 mm; Dynamic Load Rating:12,800 N; d:20 mm; Limiting Speed - Grease:16,000 rpm; D:47 mm; Bore Type:Cylindrical Bore; Factor fo:13.1; Da (max):41 mm; Radial Clearance:0.013 to 0.028 mm; da (min):26 mm; Static Load Rating:6,600 N; Fillet Radius/Chamfer:1 mm; |
| NTN CRTD6405 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ba:80.169 mm; R2:42.069 mm; H:400.05 mm; J max.:619.125 mm; Cap bolt, SAE grade:8; P150°:136 kN; P180°:160 kN; RG:1 NPT; PG:1/4 NPT; L:711.2 mm; J1:114.3 mm; Labyrinth ring:2 x LOR 168; da:203.2 mm; A2:276.225 mm; Appropriate attachment bolt size G:1.25 in; N1:34.925 mm; J min.:549.275 mm; Bearing limiting speed:2000 r/min; P90°:249 kN; Initial grease fill:1672.65 g; |
| FAG 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass inner ring:0.056 kg; r, r1,2 min.:0.3 mm; B:32 mm; F:30 mm; d:25 mm; |
| 590118Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Bearing (basic designation):23260 K; ba max.:181 mm; bb:149 mm; ba min.:154 mm; Pa:1600 kN; J6:820 mm; P120°:2500 kN; Appropriate attachment bolt, size G:36 mm; bc:186.5 mm; P180°:2800 kN; L:880 mm; N:50 mm; J1:200 mm; Cap bolt, rec. tightening torque:400 N·m; Mass housing:339 kg; Ca:212 mm; J:750 mm; H:631 mm; da:277.813 mm; ATS:380 mm; |
| NSK 170TFD2401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:1700 r/min; Eb:185 mm; Basic static load rating C0:1000 kN; Ea:155 mm; Reference speed:850 r/min; Roller and cage thrust assembly:K 81130 TN; Basic dynamic load rating C:212 kN; D:190 mm; Mass roller and cage thrust assembly:0.43 kg; Dw:12 mm; d:150 mm; Fatigue load limit Pu:88 kN; |
| FAG 528294 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Groove Width A:40 mm; Axial Load Factor Y0:2.08; Bore Type:Tapered Bore; Axial Load Factor Y1:2.13; Dynamic Load Rating:7,150,000 N; Fillet Radius/Chamfer:6 mm; Limiting Speed - Grease:510 rpm; Roller Profile:Symmetric; Static Load Rating:10,000,000 N; Da (max):692 mm; Limiting Speed - Oil:640 rpm; Axial Load Factor Y2:3.17; Radial Clearance:0.330 to 0.440 mm; Hole Diameter (do):20 mm; Configuration:Double Row; |