| FAG 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:460 mm; D:560 mm; Reference speed:700 r/min; Da max.:503 mm; Minimum load factor A:11; d1 ≈:556 mm; r1,2 min.:2.1 mm; Basic dynamic load rating C:242 kN; da min.:517 mm; H:60 mm; Mass bearing (including seat washer where applicable):29.5 kg; D1 ≈:464 mm; Fatigue load limit Pu:25 kN; Limiting speed:950 r/min; ra max.:2 mm; Basic static load rating C0:1430 kN; |
| 2THR846217 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:320 mm; r5 min.:1 mm; da max.:343 mm; K:15 mm; Calculation factor Y2:2.3; Limiting speed:1200 r/min; rc max.:1 mm; Ca min.:9 mm; Da max.:424 mm; D:440 mm; Basic static load rating C0:4650 kN; T:152 mm; ra max.:1 mm; r3,4 min.:3 mm; Calculation factor Y0:1.6; Calculation factor e:0.43; 2B:152 mm; Mass bearing pair:69 kg; Basic dynamic load rating C:1982 kN; b:17 mm; |
| 560880Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:110 mm; d:80 mm; r1,2 min.:1 mm; Limiting speed:3400 r/min; Mass bearing:0.85 kg; ra max.:1 mm; da min.:84.8 mm; B:30 mm; d1 ≈:92 mm; b1:5 mm; Calculation factor kr:0.25; s max.:1 mm; Fatigue load limit Pu:25 kN; K:3.5 mm; Basic static load rating C0:216 kN; Reference speed:2600 r/min; Da max.:105.3 mm; E:100.78 mm; Basic dynamic load rating C:121 kN; |
| 511746 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:26 mm; d:120 mm; d3:155 mm; G:M 120x2; Mass adapter sleeve assembly:2.7 kg; d1:107.95 mm; Hydraulic nut:HMV 24 E; B1:72 mm; |
| NSK 220TFD3001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass pillow block:342 kg; J min.:628.65 mm; P90°:414 kN; Cap bolt recommended tightening torque:4284.4 N·m; Ca:117.805 mm; H1:241.3 mm; J1:133.35 mm; J max.:708.025 mm; Eye bolt:2 x 1/2-13 UNC; H:473.075 mm; R2:46.831 mm; Cap bolt:1 1/2-6 UNC; N1:41.275 mm; Da:399.999 mm; Housing:SAFS 052 KA; h:69.85 mm; Initial grease fill:2749.95 g; Labyrinth ring:2 x LOR 553; ba:96.838 mm; P150°:236 kN; |
| NTN CRTD3618 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Bore Type:Cylindrical Bore; Static Load Rating:29,300 N; Cy (max):5.4 mm; Enclosure:Open; d:55 mm; Fillet Radius/Chamfer:1.5 mm; Limiting Speed - Oil:7,700 rpm; Configuration:Single Row; da (min):64 mm; B:21 mm; Limiting Speed - Grease:6,400 rpm; Factor fo:14.4; a (max):3.3 mm; Groove Width:2.7 mm; Groove Diameter:96.8 mm; D:100 mm; Dx (min):108 mm; ra (max):1.5 mm; Weight:0.607 kg; r1:0.5 mm; |
| 524902 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | b (min):2.7 mm; Snap Ring Outside Diameter:116.6 mm; Cy (max):5.4 mm; Da (max):101 mm; Radial Clearance:0.023 to 0.043 mm; Dynamic Load Rating:52,500 N; Dx (min):118 mm; D:110 mm; Fillet Radius/Chamfer:1.5 mm; D1 (max):106.8 mm; Limiting Speed - Oil:7,100 rpm; ra (max):1.5 mm; r1:0.5 mm; Static Load Rating:36,000 N; Limiting Speed - Grease:6,000 rpm; Configuration:Single Row; B:22 mm; Snap Ring Width:2.5 mm; |
| 512250Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Cap bolt, SAE grade:5; R1:104.775 mm; Initial grease fill:793.8 g; Pa:40 kN; h:47.625 mm; H2:66.675 mm; Housing:SAF 038 KA; R2:33.337 mm; A2:222.25 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:203.4 N·m; A1:158.75 mm; da:177.8 mm; H1:169.875 mm; Max. speed for PosiTrac Plus seal:825 r/min; Cap bolt:4 x 3/4-10 UNC; End plug (suffix Y):EPR 21; PosiTrac Plus contact element:2 x B10724-155; |
| 829994 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:52 mm; ra (max):3 mm; Radial Clearance:0.053 to 0.102 mm; da (min):188 mm; Factor fo:15.3; D:310 mm; Configuration:Single Row; Enclosure:Open; d:170 mm; Limiting Speed - Grease:2,000 rpm; Static Load Rating:224,000 N; Da (max):292 mm; Weight:17.500 kg; Fillet Radius/Chamfer:4 mm; Limiting Speed - Oil:2,400 rpm; Dynamic Load Rating:212,000 N; Bore Type:Cylindrical Bore; |
| 2THR644713 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass needle roller:1.36 g; Dw:4 mm; r1,2 min.:0.3 mm; Lw:13.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; |