| 2THR765613 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | db (min):382 mm; Weight:68.800 kg; ra (max):4 mm; ra1 (max):4 mm; Limiting Speed - Grease:1,100 rpm; Enclosure:Open; Bore Type:Cylindrical Bore; Da (max):518 mm; D:540 mm; Static Load Rating:1,830,000 N; db (max):401 mm; Configuration:Single Row; B:82 mm; Fillet Radius/Chamfer:5 mm; Radial Clearance:0.190 to 0.280 mm; dc (min):410 mm; d:360 mm; Dynamic Load Rating:1,110,000 N; r1:5 mm; Limiting Speed - Oil:1,300 rpm; |
| 524194 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Radial Clearance:0.035 to 0.060 mm; dc (min):38 mm; Weight:0.121 kg; B:13 mm; ra1 (max):0.6 mm; Outside Ring Inside Diameter:48.5 mm; db (min):33.5 mm; d:30 mm; Configuration:Single Row; Limiting Speed - Grease:12,000 rpm; Static Load Rating:19,600 N; da (min):35 mm; Db (min):52 mm; r1:0.6 mm; ra (max):1 mm; Dynamic Load Rating:19,700 N; db (max):35 mm; Fillet Radius/Chamfer:1 mm; Enclosure:Open; D:55 mm; |
| 513401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | R1:60.325 mm; H2:41.275 mm; P90°:60.9 kN; J max.:295.275 mm; Housing:FSAF 518; P180°:42.3 kN; Cap bolt, SAE grade:5; da:82.55 mm; A2:206.375 mm; J1:53.975 mm; P120°:38.3 kN; End plug (suffix Y):EPR 11; J min.:263.525 mm; Pa:8.1 kN; P150°:34.7 kN; Appropriate attachment bolt size G:0.625 in; P60°:101 kN; Max. speed for Taconite seal:950 r/min; Cap bolt:2 x 5/8-11 UNC; Stabilizing ring:2 x SR-1518; |
| SKF 351019C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Shaft design:Without shaft; Maximum disc diameter max.:500 mm; Maximum rotational disc speed max.:350 r/min; Minimum disc diameter min.:250 mm; Housing material:Sheet steel; D1:55 mm; D:91 mm; J:75 mm; N:6.7 mm; Recommended maximum temperature max.:50 °C; Purpose/ Application:Seeding; Minimum rotational disc speed min.:100 r/min; Corrosion protection:Zinc-coated housing; B:29.5 mm; Mass:0.46 kg; |
| 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1 (max):183.6 mm; Fillet Radius/Chamfer:3 mm; Limiting Speed - Grease:3,600 rpm; d:90 mm; Dx (min):205 mm; r1:0.5 mm; Snap Ring Width:3.1 mm; Bore Type:Cylindrical Bore; b (min):3.5 mm; Static Load Rating:107,000 N; ra (max):2.5 mm; Weight:4.910 kg; Dynamic Load Rating:143,000 N; Limiting Speed - Oil:4,300 rpm; Cy (max):8.4 mm; da (min):104 mm; B:43 mm; D:190 mm; Factor fo:13.3; a (max):5.7 mm; |
| 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:3200 r/min; Basic dynamic load rating C:21.6 kN; Basic static load rating C0:15.3 kN; N1:14.5 mm; J max.:133 mm; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, mm G:12 mm; d:34.925 mm; H:93 mm; A5:32.5 mm; H2:19 mm; A:45 mm; Fatigue load limit Pu:0.655 kN; L:164 mm; A1:27 mm; Hexagonal key size for grub screw N:3.969 mm; N:21.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| NTN CRTD6104 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1,2 min.:4 mm; Da max.:911 mm; d1 ≈:995 mm; Fatigue load limit Pu:116 kN; D:1000 mm; Reference speed:320 r/min; D1 ≈:855 mm; Minimum load factor A:470; Limiting speed:450 r/min; ra max.:3 mm; H:120 mm; Basic dynamic load rating C:1060 kN; Mass bearing (including seat washer where applicable):165 kg; d:850 mm; da min.:939 mm; Basic static load rating C0:9500 kN; |
| NSK 170TFD2401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:1700 r/min; Eb:185 mm; Basic static load rating C0:1000 kN; Ea:155 mm; Reference speed:850 r/min; Roller and cage thrust assembly:K 81130 TN; Basic dynamic load rating C:212 kN; D:190 mm; Mass roller and cage thrust assembly:0.43 kg; Dw:12 mm; d:150 mm; Fatigue load limit Pu:88 kN; |
| NSK 260TFD3602 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1,2 min.:1 mm; Mass shaft washer:0.12 kg; d1:90 mm; d:65 mm; B:5.25 mm; |
| 2THR644713 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass needle roller:1.36 g; Dw:4 mm; r1,2 min.:0.3 mm; Lw:13.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; |