| 829784K DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Enclosure:Open; Radial Clearance:0.125 to 0.195 mm; Fillet Radius/Chamfer:6 mm; d:260 mm; Da (max):512 mm; r1:6 mm; Limiting Speed - Grease:1,000 rpm; Dynamic Load Rating:1,620,000 N; db (max):331 mm; Bore Type:Cylindrical Bore; dc (min):339 mm; Weight:117.000 kg; ra (max):5 mm; ra1 (max):5 mm; B:102 mm; dd (min):359 mm; Static Load Rating:2,230,000 N; Configuration:Single Row; db (min):288 mm; D:540 mm; |
| NSK 350TFD4901 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Weight:14.300 kg; Bore Type:Cylindrical Bore; Da (max):276 mm; d:160 mm; Factor fo:15.4; Dynamic Load Rating:185,000 N; B:48 mm; Radial Clearance:0.046 to 0.091 mm; D:290 mm; Limiting Speed - Grease:2,100 rpm; ra (max):2.5 mm; da (min):174 mm; Fillet Radius/Chamfer:3 mm; Static Load Rating:186,000 N; Enclosure:Double Shield; Configuration:Single Row; |
| 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:3200 r/min; Basic dynamic load rating C:21.6 kN; Basic static load rating C0:15.3 kN; N1:14.5 mm; J max.:133 mm; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, mm G:12 mm; d:34.925 mm; H:93 mm; A5:32.5 mm; H2:19 mm; A:45 mm; Fatigue load limit Pu:0.655 kN; L:164 mm; A1:27 mm; Hexagonal key size for grub screw N:3.969 mm; N:21.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| 509352 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:1300 r/min; H1:63.5 mm; da:55.563 mm; A:66.675 mm; J max.:203.2 mm; H2:38.1 mm; H:127 mm; d2:82.55 mm; Mass bearing unit:6.12 kg; J min.:193.675 mm; Attachment bolt diameter G:15.875 mm; A1:84.931 mm; B:79.375 mm; L:244.475 mm; s:28.575 mm; S:0.794 mm; Basic dynamic load rating C:99.6 kN; |
| 547720Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass rod end:0.65 kg; Basic dynamic load rating C:48 kN; w:30 mm; Basic static load rating C0:90 kN; dk:35.5 mm; r1 min.:0.6 mm; G:M 24x2; d4 ≈:35 mm; C1 max.:18 mm; d2 max.:65 mm; l3 min.:36 mm; Material constant KM:330; l5 ≈:18 mm; B:20 mm; h1:94 mm; l4 max.:128 mm; α:7 °; Specific dynamic load factor K:100 N/mm²; l7 min.:30 mm; d:25 mm; |
| 829234 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Attainable speed for grease lubrication:18000 r/min; Number of balls z:23; Attainable speed for oil-air lubrication:28000 r/min; d:85 mm; Calculation factor fHC:1.01; Reference grease quantity Gref:7 cm³; Preload class B GB:479 N; dn:98.6 mm; da min.:91 mm; Mass bearing:0.42 kg; Preload class C GC:957 N; Static axial stiffness, preload class C:150 N/µm; Static axial stiffness, preload class B:109 N/µm; |
| FAG 579703 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1,2 min.:4 mm; d:850 mm; H:90 mm; D1 ≈:855 mm; Minimum load factor A:240; Basic dynamic load rating C:761 kN; Reference speed:380 r/min; Limiting speed:560 r/min; da min.:936 mm; Mass bearing (including seat washer where applicable):115 kg; d1 ≈:995 mm; Da max.:914 mm; Fatigue load limit Pu:83 kN; ra max.:3 mm; Basic static load rating C0:6800 kN; D:1000 mm; |
| SKF 350901C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Configuration:Single Row; Limiting Speed - Oil:8,500 rpm; Outside Ring Inside Diameter:77.5 mm; Radial Clearance:0.025 to 0.050 mm; Fillet Radius/Chamfer:1.5 mm; dd (min):60 mm; Static Load Rating:57,000 N; ra (max):1.5 mm; Db (min):81.5 mm; Db (max):80 mm; db (min):48.5 mm; d:40 mm; r1:1.5 mm; dc (min):55 mm; Enclosure:Open; da (min):48.5 mm; D:90 mm; Limiting Speed - Grease:6,700 rpm; Dynamic Load Rating:58,500 N; |
| 513401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | R1:60.325 mm; H2:41.275 mm; P90°:60.9 kN; J max.:295.275 mm; Housing:FSAF 518; P180°:42.3 kN; Cap bolt, SAE grade:5; da:82.55 mm; A2:206.375 mm; J1:53.975 mm; P120°:38.3 kN; End plug (suffix Y):EPR 11; J min.:263.525 mm; Pa:8.1 kN; P150°:34.7 kN; Appropriate attachment bolt size G:0.625 in; P60°:101 kN; Max. speed for Taconite seal:950 r/min; Cap bolt:2 x 5/8-11 UNC; Stabilizing ring:2 x SR-1518; |
| 513280Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A2:153.194 mm; Mass pillow block:28.1 kg; Ca:55.804 mm; ba:38.894 mm; H:217.488 mm; N1:22.225 mm; Pa:10.2 kN; Cap bolt:2 x 3/4-10 UNC; Max. speed for PosiTrac Plus seal:1650 r/min; H1:114.3 mm; P60°:119 kN; H2:44.45 mm; J max.:333.375 mm; Da:180 mm; J min.:295.275 mm; L:387.35 mm; P90°:71.2 kN; P150°:40 kN; h:42.069 mm; RG:3/8 NPT; |