| NTN CRTD5005 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | L1:76 mm; H2:40 mm; B4:6 mm; Grub (set) screw G2:5/16-24 UNF; A5:28.2 mm; A2:30 mm; s1:25.4 mm; Mass bearing unit:0.77 kg; Basic static load rating C0:15.3 kN; L:125 mm; Fatigue load limit Pu:0.655 kN; d:31.75 mm; H1:89 mm; L3:63.5 mm; B:42.9 mm; Limiting speed with shaft tolerance h6:3200 r/min; G1:21 mm; A:34 mm; A1:12 mm; Recommended tightening torque for grub screw:6.5 N·m; |
| NSK 350TFD5401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | dk:35.5 mm; d:25 mm; Material constant KM:330; Basic dynamic load rating C:48 kN; l1 min.:53 mm; r1 min.:0.6 mm; α:7 °; Specific dynamic load factor K:100 N/mm²; Mass rod end:0.53 kg; l7 min.:30 mm; Basic static load rating C0:78 kN; G:M 24x2; B:20 mm; d2 max.:65 mm; C1 max.:18 mm; h:94 mm; l2 max.:128 mm; |
| FAG 522008 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | dd (min):134 mm; db (min):109 mm; Limiting Speed - Grease:3,000 rpm; ra1 (max):2.5 mm; Db (min):186 mm; da (min):109 mm; ra (max):2.5 mm; Db (max):178 mm; Bore Type:Cylindrical Bore; Da (max):186 mm; Enclosure:Open; Fillet Radius/Chamfer:3 mm; Configuration:Single Row; dc (min):124 mm; Static Load Rating:289,000 N; db (max):119 mm; D:200 mm; Radial Clearance:0.050 to 0.085 mm; Limiting Speed - Oil:3,600 rpm; |
| 829234 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Attainable speed for grease lubrication:18000 r/min; Number of balls z:23; Attainable speed for oil-air lubrication:28000 r/min; d:85 mm; Calculation factor fHC:1.01; Reference grease quantity Gref:7 cm³; Preload class B GB:479 N; dn:98.6 mm; da min.:91 mm; Mass bearing:0.42 kg; Preload class C GC:957 N; Static axial stiffness, preload class C:150 N/µm; Static axial stiffness, preload class B:109 N/µm; |
| 2THR55 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | s:25.4 mm; H2:33.337 mm; A1:77.787 mm; L:187.325 mm; d2:68.659 mm; H:109.537 mm; Mass bearing unit:3.65 kg; Limiting speed:1600 r/min; Basic dynamic load rating C:77 kN; S:0.794 mm; J max.:152.4 mm; A:58.737 mm; B:73.025 mm; H1:53.975 mm; da:44.45 mm; Attachment bolt diameter G:12.7 mm; J min.:131.762 mm; |
| NSK 200TFD2801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Roller Profile:Asymmetric; Weight:1.050 kg; Bore Type:Tapered Bore; Limiting Speed - Grease:7,800 rpm; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y1:1.55; d:40 mm; Static Load Rating:134,000 N; Fillet Radius/Chamfer:1.5 mm; Groove Width A:7 mm; D:90 mm; Retainer Material:Machined Brass; Constant e:0.43; Hole Diameter (do):4 mm; Configuration:Double Row; Axial Load Factor Y2:2.31; Radial Clearance:0.035 to 0.050 mm; |
| NTN CRTD3401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | db (max):57 mm; Limiting Speed - Oil:7,200 rpm; ra1 (max):1.5 mm; r1:1.5 mm; Configuration:Single Row; ra (max):1.5 mm; B:36 mm; dc (min):60 mm; Static Load Rating:153,000 N; dd (min):66 mm; Dynamic Load Rating:137,000 N; d:45 mm; D:100 mm; Da (max):91.5 mm; Inside Ring Outside Diameter:58.5 mm; Fillet Radius/Chamfer:1.5 mm; Enclosure:Open; Bore Type:Cylindrical Bore; Limiting Speed - Grease:6,000 rpm; |
| NSK 180TFD2801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:50 mm; Mass rod end:4.1 kg; Material constant KM:330; d4 ≈:70 mm; α:6 °; Specific dynamic load factor K:100 N/mm²; B:35 mm; l4 max.:254 mm; h1:195 mm; C1 max.:31 mm; G:M 52x3; l3 min.:68 mm; r1 min.:0.6 mm; Basic static load rating C0:270 kN; d2 max.:114 mm; Basic dynamic load rating C:156 kN; l7 min.:60 mm; dk:66 mm; w:60 mm; l5 ≈:30 mm; |
| 82926 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra1 (max):0.6 mm; D:62 mm; ra (max):1 mm; Inside Ring Outside Diameter:38.5 mm; Bore Type:Cylindrical Bore; r1:0.6 mm; Static Load Rating:33,000 N; dd (min):44 mm; Da (max):56 mm; db (min):35 mm; Limiting Speed - Oil:12,000 rpm; d:30 mm; Limiting Speed - Grease:10,000 rpm; Fillet Radius/Chamfer:1 mm; Dynamic Load Rating:33,000 N; Enclosure:Open; B:20 mm; dc (min):40 mm; db (max):37 mm; Radial Clearance:0.020 to 0.045 mm; |
| FAG 567356 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | M1:7 mm; M3:22 mm; Spring washer in accordance with DIN 128:A 20; Hexagonal head bolt:M 20x40; Mass locking clip:0.28 kg; B:50 mm; M:21 mm; M2:66 mm; |