| FAG 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:300 r/min; Number of pulses per revolution N:64; Mass sensor unit:0.58 kg; Phase shift output signal:90 °; Phase shift output signal tolerance ±:30 °; Duty cycle:50 %; Period accuracy ±:8 %; Cable connector type:AMP Superseal; Duty cycle tolerance ±:10 %; |
| FAG 524134 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Bore Type:Cylindrical Bore; B:26 mm; d:80 mm; Configuration:Single Row; Weight:1.400 kg; Fillet Radius/Chamfer:2 mm; D:140 mm; ra (max):2 mm; Da (max):130 mm; Static Load Rating:53,000 N; Enclosure:Double Seal; Factor fo:14.6; Radial Clearance:0.025 to 0.051 mm; Limiting Speed - Grease:3,000 rpm; Dynamic Load Rating:72,500 N; da (min):90 mm; |
| 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P120°:73.8 kN; Initial grease fill:382.73 g; A2:206.375 mm; Labyrinth ring:2 x LOR 557; L:466.725 mm; A1:133.35 mm; P180°:84.5 kN; P60°:189 kN; H2:60.325 mm; da:93.662 mm; Da:240 mm; PosiTrac Plus contact element:2 x B10724-109; R2:36.513 mm; H:287.337 mm; S:4.763 mm; Adapter sleeve assembly:SNW 122x3.11/16; Cap bolt recommended tightening torque:1220 N·m; Ca:89.789 mm; J max.:406.4 mm; |
| FAG 529086 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:112 kN; C1 max.:19 mm; r1 min.:0.6 mm; d4 max.:36 mm; Size bolt with internal hexagon:M 10; N1 max.:19 mm; N max.:80 mm; Basic dynamic load rating C:62 kN; Mass rod end:1.35 kg; l4 max.:125 mm; Specific dynamic load factor K:100 N/mm²; G:M 20x1.5; Material constant KM:330; l7 min.:35 mm; α:6 °; Tightening torque bolt with internal hexagon:45 N·m; l3 min.:29 mm; |
| 829252 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Ca:153.797 mm; R2:46.831 mm; J max.:708.025 mm; End plug (suffix Y):EPR 23; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:5; Mass pillow block:284 kg; S:4.763 mm; P180°:173 kN; ba:107.95 mm; L:831.85 mm; P60°:423 kN; Max. speed for Taconite seal:385 r/min; A2:368.3 mm; Pa:95.2 kN; P120°:160 kN; H:474.663 mm; P150°:145 kN; H2:95.25 mm; Housing:SAW 544; |
| SKF 350976C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | h:25 mm; B:90 mm; d3:980 mm; Associated eyebolt for handling:M 12; b:60 mm; d1:925 mm; d2:887 mm; G:Tr 850x7; B3:20 mm; B5:115 mm; Mass lock nut:104 kg; |
| FAG 547482 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Roller Profile:Symmetric; Da (max):166 mm; Fillet Radius/Chamfer:3 mm; D:180 mm; Limiting Speed - Oil:3,400 rpm; Retainer Material:Pressed Steel; Constant e:0.33; Axial Load Factor Y2:3.00; Limiting Speed - Grease:2,600 rpm; ra (max):2.5 mm; Radial Clearance:0.110 to 0.140 mm; Axial Load Factor Y1:2.02; Groove Width A:11 mm; Bore Type:Tapered Bore; d:85 mm; da (min):99 mm; Center Guidance:Floating Steel Ring; |
| 550760Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:34.925 mm; Housing material:Cast iron; A3:3.2 mm; Fatigue load limit Pu:0.655 kN; B:42.9 mm; Da:88.9 mm; B4:6 mm; Limiting speed:5300 r/min; A1:13 mm; Recommended diameter for attachment bolts, inch G:0.5 in; RG:1/4-28 UNF; H:156 mm; Basic dynamic load rating C:25.5 kN; SWN:7 mm; Basic static load rating C0:15.3 kN; A:34.5 mm; DN:6.5 mm; Recommended diameter for attachment bolts, mm G:12 mm; Thread grub screw G2:5/16-24 UNF; |
| 560880Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:110 mm; d:80 mm; r1,2 min.:1 mm; Limiting speed:3400 r/min; Mass bearing:0.85 kg; ra max.:1 mm; da min.:84.8 mm; B:30 mm; d1 ≈:92 mm; b1:5 mm; Calculation factor kr:0.25; s max.:1 mm; Fatigue load limit Pu:25 kN; K:3.5 mm; Basic static load rating C0:216 kN; Reference speed:2600 r/min; Da max.:105.3 mm; E:100.78 mm; Basic dynamic load rating C:121 kN; |
| NTN CRTD6104 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1,2 min.:4 mm; Da max.:911 mm; d1 ≈:995 mm; Fatigue load limit Pu:116 kN; D:1000 mm; Reference speed:320 r/min; D1 ≈:855 mm; Minimum load factor A:470; Limiting speed:450 r/min; ra max.:3 mm; H:120 mm; Basic dynamic load rating C:1060 kN; Mass bearing (including seat washer where applicable):165 kg; d:850 mm; da min.:939 mm; Basic static load rating C0:9500 kN; |