| 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A1:2.5 mm; Mass housing:0.34 kg; N:11 mm; Recommended diameter for attachment bolts, mm G:10 mm; J:100 mm; Material:Pressed steel; D:72 mm; Da min.:77 mm; Permissible radial load max.:6.5 kN; A2:10 mm; H:122 mm; Recommended diameter for attachment bolts, inch G:0.375 in; |
| 829252 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Ca:153.797 mm; R2:46.831 mm; J max.:708.025 mm; End plug (suffix Y):EPR 23; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:5; Mass pillow block:284 kg; S:4.763 mm; P180°:173 kN; ba:107.95 mm; L:831.85 mm; P60°:423 kN; Max. speed for Taconite seal:385 r/min; A2:368.3 mm; Pa:95.2 kN; P120°:160 kN; H:474.663 mm; P150°:145 kN; H2:95.25 mm; Housing:SAW 544; |
| NSK 550TFD7601 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | R2:21.431 mm; P60°:75.6 kN; R1:46.038 mm; A2:195.275 mm; A1:79.375 mm; L:285.75 mm; Taconite seal (db shaft position):TER 79; Pa:19.6 kN; Initial grease fill:68.04 g; db:87.313 mm; Cap bolt, SAE grade:8; Stabilizing ring:SR-15-0; P90°:45.4 kN; S:3.175 mm; Taconite seal (dc shaft position):TER 46; da:75 mm; ba:32.544 mm; P180°:30.2 kN; Cap bolt recommended tightening torque:149.1 N·m; |
| FAG 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1,2 min.:1.5 mm; B:13.5 mm; d:90 mm; Mass shaft washer:1.33 kg; d1:155 mm; |
| FAG 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting Speed - Oil:16,000 rpm; Enclosure:Open; Dynamic Load Rating:4,750 N; Cy (max):1.8 mm; D:47 mm; r1:0.3 mm; Configuration:Single Row; d:35 mm; Static Load Rating:3,800 N; Radial Clearance:0.015 to 0.033 mm; a (max):1.3 mm; Fillet Radius/Chamfer:0.3 mm; Weight:0.030 kg; Limiting Speed - Grease:14,000 rpm; Dx (min):50.5 mm; Bore Type:Cylindrical Bore; Da (max):45 mm; ra (max):0.3 mm; da (min):37 mm; |
| FAG 522837 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:10 mm; d:65 mm; Static Load Rating:11,500 N; D:85 mm; Enclosure:Open; ra (max):0.6 mm; Weight:0.125 kg; Configuration:Single Row; Dynamic Load Rating:11,900 N; Factor fo:16.2; Bore Type:Cylindrical Bore; da (min):69 mm; Limiting Speed - Oil:8,700 rpm; Radial Clearance:0.023 to 0.043 mm; Limiting Speed - Grease:7,500 rpm; Da (max):81 mm; Fillet Radius/Chamfer:0.6 mm; |
| 522008 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static Load Rating:1,990,000 N; Limiting Speed - Grease:1,300 rpm; Configuration:Single Row; dc (min):235 mm; Dynamic Load Rating:1,380,000 N; r1:4 mm; Radial Clearance:0.075 to 0.125 mm; db (max):227 mm; ra1 (max):3 mm; db (min):198 mm; dd (min):255 mm; D:380 mm; ra (max):3 mm; Fillet Radius/Chamfer:4 mm; Limiting Speed - Oil:1,700 rpm; Enclosure:Open; Da (max):362 mm; d:180 mm; B:126 mm; Bore Type:Cylindrical Bore; |
| FAG 521823 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da:44.45 mm; R2:19.05 mm; Da:110 mm; N1:19.05 mm; h:36.513 mm; ba:27.781 mm; Ca:50.8 mm; J min.:196.85 mm; Max. speed for Taconite seal:1800 r/min; Pa:4.07 kN; P150°:12.9 kN; A2:190.5 mm; Mass pillow block:10 kg; P90°:23.6 kN; PG:1/8 NPT; P120°:14.2 kN; A1:69.85 mm; H:147.637 mm; Taconite seal:TER 21; Cap bolt:2 x 1/2-13 UNC; |
| NSK 470TFD7201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Dynamic Load Rating:1,510,000 N; Fillet Radius/Chamfer:5 mm; db (min):222 mm; ra (max):4 mm; db (max):254 mm; Inside Ring Outside Diameter:260 mm; Configuration:Single Row; Limiting Speed - Oil:1,500 rpm; r1:5 mm; d:200 mm; dd (min):283 mm; Limiting Speed - Grease:1,200 rpm; Bore Type:Cylindrical Bore; ra1 (max):4 mm; B:138 mm; Static Load Rating:2,240,000 N; D:420 mm; Radial Clearance:0.140 to 0.195 mm; |
| FAG 524194 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Hole Diameter (do):20 mm; Limiting Speed - Grease:420 rpm; Weight:468.000 kg; d:560 mm; Axial Load Factor Y1:2.21; Limiting Speed - Oil:520 rpm; Constant e:0.31; Retainer Material:Machined Brass; Da (max):792 mm; Enclosure:Open; Axial Load Factor Y0:2.16; Roller Profile:Symmetric; ra (max):5 mm; Configuration:Double Row; Axial Load Factor Y2:3.29; da (min):588 mm; B:258 mm; Groove Width A:45 mm; D:820 mm; |