| AMI KHRRCSM204-12 Cartridge Unit Bearings | Fatigue limit load, Cu:3.45 kN; Contact angle α:15 °; Static load, C0:69.2 kN; Da max:131.5 mm; Radial rigidity:878 N/µm; Characteristic outer ring frequency, BPF0:8.73 Hz; Characteristic rolling element frequency, BSF:7.5 Hz; Axial displacement K Factor:0.96; d:90 mm; Mass:1.15 kg; |
| AMI UCC315-47 Cartridge Unit Bearings | e:29 mm; Designation of housing:FA212N-; d:60 mm; J1:92 mm; Designation of open end cover:SCO212-60; A2:68.7 mm; C:52.5 kN; Recommended tightening torque for set screw:22 Nm; A:48 mm; Designation of bearing:UC212G2; |
| AMI UGC315 Cartridge Unit Bearings | A:34 mm; Designation of bearing:US207-23G2T20; Z:30 mm; S:8.5 mm; T min.:-20 °C; A2:42.5 mm; C0:15.2 kN; d:36.51 mm; e:19 mm; Weight:1.07 kg; |
| AMI UGC310 Cartridge Unit Bearings | T max.:100 °C; G:M10x1; Recommended tightening torque for set screw:33 Nm; N1:31 mm; L:310 mm; C0:63.8 kN; A:83 mm; Designation of bearing:UC217G2L3; N:25mm; T min.:-20 °C; |
| AMI UCLCX09 Cartridge Unit Bearings | C:25.7 kN; N:14mm; Designation of open end cover:SCOE207-35; J:92 mm; B1:38.9 mm; e:21 mm; d:35 mm; G:R1/8"; A1:12.5 mm; d1:51.1 mm; |
| AMI UGC310-31 Cartridge Unit Bearings | H:99 mm; Recommended tightening torque for set screw:3.2 Nm; C0:4.78 kN; T max.:200 °C; A:26 mm; J:76.5 mm; Designation of bearing:US202-10G2T20; T min.:-20 °C; A2:33 mm; s1:11 mm; |
| AMI UCC208-25 Cartridge Unit Bearings | r1s min:0.3 mm; Characteristic rolling element frequency, BSF:5.26 Hz; D1:24.3 mm; Characteristic cage frequency, FTF:0.42 Hz; da min:17.5 mm; Max operating temperature, Tmax:120 °C; Preload level:7; Static load, C0:2.33 kN; D6:20.2 mm; Contact angle α:25 °; |
| AMI UCC207-20 Cartridge Unit Bearings | Bearing Outer Ring Material:None; Manufacturing Plant Location:Rogersville, TN; Ball Bearing Housing Series:206 Series; Ship Weight:1.14 LB; Flinger Material:Stainless Steel; Ball Grade:Class 10; Bearing Locking Device:Setscrew; Bearing Series:206 Series; Housing Material:Polymer; Retainer Material:Polymer; |
| AMI UCLCX09-26 Cartridge Unit Bearings | Mass:0.47 kg; B:24.61 mm; Characteristic rolling element frequency, BSF:6 Hz; d:34.92 mm; Nlim (oil):7,100 rpm; e:0.29; Characteristic cage frequency, FTF:0.42 Hz; Y2:2.07; Dynamic load, C:71 kN; Min operating temperature, Tmin:-40 °C; |
| AMI KHRRCSM203 Cartridge Unit Bearings | A:31 mm; G:R1/8"; H:120 mm; B:42.8 mm; T max.:100 °C; H2:61 mm; Designation of bearing:EX209-26G2T04; T min.:-40 °C; d1:62 mm; SW:3.97 mm; |
| AMI UCC203-11 Cartridge Unit Bearings | S:14.9 mm; Designation of bearing:US212-39G2T20; H2:140 mm; B:53.7 mm; C:52.5 kN; G:R1/8"; Designation of housing:PE212N-; N:18mm; T max.:200 °C; L1:71 mm; |
| AMI UCC206-19 Cartridge Unit Bearings | C0:11.2 kN; Designation of housing:PA206N-; S:15.9 mm; H:42.9 mm; G:M6x1; H2:84 mm; s1:19.05 mm; H1:13 mm; d:31.75 mm; Z:18 mm; |
| AMI UCC309-28 Cartridge Unit Bearings | T min.:-40 °C; N:11mm; H1:14.5 mm; B1:30.9 mm; G:R1/8"; Weight:0.55 kg; B:21.4 mm; d:20 mm; s1:24.2 mm; A:32 mm; |
| AMI UCC315-48 Cartridge Unit Bearings | D:80 mm; B:21 mm; ra max:1.5 mm; Brand:NTN; Dynamic load, C:34.5 kN; Mass:0.53 kg; Min operating temperature, Tmin:-20 °C; da min:33 mm; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.35 Hz; |
| AMI UCC321 Cartridge Unit Bearings | Bearing Inner Ring Material:Steel; Brand:Baldor-Dodge; Flinger Type:None; End Cap Groove:No; Max Bearing Speed:5500 rpm; Anti-Rotation Pin:Yes; Bearing Series:207 Series; Housing Coating:Powder Coat; Bearing Outer Ring Material:Steel; Manufacturing Plant Location:Rogersville, TN; |
| AMI UCLCX07 Cartridge Unit Bearings | A:38 mm; s1:11 mm; H2:97 mm; A1:19 mm; G:M6x1; S:6 mm; C0:4.78 kN; N1:16 mm; T max.:100 °C; Designation of housing:PH203-; |