| AMI UGC309 Cartridge Unit Bearings | Grease Type:Unirex N2; d:30.0000 in; Bearing Insert Material:Steel; Housing Material:Cast Iron; Ring Size:Standard; Bearing Duty:Normal Duty; Flinger Type:Non-Rubberized; Shaft Attachment (2):Grip Tight; Bearing Series:207 Series; Bearing Inner Ring Material:Steel; |
| AMI UEC204 Cartridge Unit Bearings | B1:71.3 mm; H:222 mm; d1:74.5 mm; J:184 mm; T min.:-20 °C; s1:48.4 mm; A:45.8 mm; A1:15 mm; Recommended tightening torque for set screw:16.8 Nm; Designation of bearing:EX211-32G2; |
| AMI UCC204 Cartridge Unit Bearings | Grease Type:Unirex N2; UPC:782475304950; Bearing Insert Material:Steel; Expansion Type:Non-Expansion; d:2.4375 in; Flinger Material:Steel; Seal Type:Shield; Bearing Locking Device:Tapered Adapter Slee; Ship Weight:11.92 LB; Ball Grade:Class 10; |
| AMI UGC318 Cartridge Unit Bearings | Designation of housing:T209N-; N:29mm; d1:62 mm; S:11 mm; d:45 mm; H1:102 mm; B:30.2 mm; H2:83 mm; T max.:100 °C; L:144 mm; |
| AMI KHRRCSM202-10 Cartridge Unit Bearings | Bore:1.181 Inch | 30 Mill; Mass:0.36 kg; B:19 mm; a min:3.07 mm; Characteristic rolling element frequency, BSF:4.14 Hz; b max:2.2 mm; Manufacturer Item Number:6306ZNRS; Ca min:4.67 mm; Characteristic inner ring frequency, BPFI:4.92 Hz; Fatigue limit load, Cu:0.68 kN; |
| AMI UCC205-15 Cartridge Unit Bearings | Characteristic outer ring frequency, BPF0:3.07 Hz; Static load, C0:2.39 kN; da max:16 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; da min:14 mm; Nlim (grease):26,000 rpm; Radial clearance class:C3; Dynamic load, C:5.1 kN; D:28 mm; rs min:0.3 mm; |
| AMI KHRRCSM206-17 Cartridge Unit Bearings | T min.:-20 °C; Dz:54 mm; G:R1/8"; d:20 mm; s1:30.5 mm; A2:45.5 mm; T max.:200 °C; B1:43.5 mm; Z:50 mm; Recommended tightening torque for set screw:5.5 Nm; |
| AMI UCC207-23 Cartridge Unit Bearings | A1:25 mm; d:31.75 mm; Designation of housing:PAE206-; J:76.2 mm; Designation of bearing:UC206-20G2T20; S:15.9 mm; T min.:-20 °C; N:M10; L1:22 mm; T max.:200 °C; |
| AMI UEC206-20 Cartridge Unit Bearings | Designation of bearing:EX205G2T04; Designation of closed end cover:SCCE205; d1:37.4 mm; d:25 mm; Z:65 mm; H:78 mm; G:R1/8"; S:17.4 mm; L:264 mm; T max.:100 °C; |
| AMI UCC311 Cartridge Unit Bearings | J:60 mm; Designation of bearing:UC206-19G2L4; Weight:1.11 kg; H2:83 mm; B:38.1 mm; N:M10; C:19.5 kN; E:18 mm; L1:25 mm; C0:11.2 kN; |
| AMI UCC208 Cartridge Unit Bearings | Z:59.9 mm; Weight:1.56 kg; s1:21.45 mm; N:M12; H1:20 mm; d:33.34 mm; Designation of housing:PG207N-; H2:93 mm; T min.:-40 °C; S:17.5 mm; |
| AMI UEC205-16 Cartridge Unit Bearings | T min.:-40 °C; L1:56 mm; C0:11.2 kN; B:38.1 mm; s1:19.05 mm; Z:19 mm; Designation of housing:PH206N-; Recommended tightening torque for set screw:3.7 Nm; A:50 mm; T max.:100 °C; |
| AMI UCC211-35 Cartridge Unit Bearings | d:12 mm; H3:62; N:12mm; C0:6.65 kN; J:78 mm; G:M6x1; T min.:-20 °C; Recommended tightening torque for set screw:5.5 Nm; L:100 mm; A4:20.5 mm; |
| AMI UEC206 Cartridge Unit Bearings | Seal Type:Single Lip; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Ring Size:Standard; Ship Weight:1.62 LB; Bearing Locking Device:Setscrew; Flinger Type:Rubberized; Housing Material:Cast Iron; Flinger Material:Steel; Retainer Type:Std Retainer; |
| AMI UEC206-19 Cartridge Unit Bearings | J:90.5 mm; Weight:0.55 kg; Recommended tightening torque for set screw:8 Nm; B1:35.7 mm; S:9 mm; T max.:200 °C; A:9 mm; C0:11.2 kN; L:84 mm; d:28.58 mm; |
| AMI UCC318-55 Cartridge Unit Bearings | Designation of bearing:US211-32G2; T min.:-20 °C; G:M6x1; B:45.3 mm; L:219 mm; Weight:3.61 kg; L1:70 mm; A:60 mm; Designation of housing:P211N-; Z:77 mm; |