| AMI KHRRCSM206-18 Cartridge Unit Bearings | H2:99 mm; d1:58 mm; H:49.2 mm; C0:18.2 kN; L:116 mm; Adapter sleeve reference:H2308-20; d:31.75 mm; A:47 mm; T min.:-20 °C; s1:24.5 mm; |
| AMI UCC211-34 Cartridge Unit Bearings | C0:32.8 kN; C:52.5 kN; L1:52 mm; J:114 mm; T min.:-40 °C; Weight:3.79 kg; d:61.91 mm; S:12 mm; Recommended tightening torque for set screw:16.8 Nm; s1:39 mm; |
| AMI UCC211-32 Cartridge Unit Bearings | A1:28 mm; C0:11.2 kN; H1:18 mm; Weight:1.73 kg; B1:35.7 mm; C:19.5 kN; T min.:-20 °C; H2:130 mm; Designation of housing:PH206-; d1:44.1 mm; |
| AMI UCLCX07-20 Cartridge Unit Bearings | Fatigue limit load, Cu:0.37 kN; r1a max:0.6 mm; Dynamic load, C:9.9 kN; da min:40.5 mm; rs min:1 mm; D:62 mm; Max operating temperature, Tmax:120 °C; Mass:0.15 kg; Brand:SNR; Axial rigidity:125 N/µm; |
| AMI UCLC211 Cartridge Unit Bearings | Bearing Series:209 Series; Retainer Type:Std Retainer; d:1.6875 in; Expansion Type:Non-Expansion; Housing Coating:Powder Coat; Shaft Attachment (2):Eccentric Collar; UPC:782476337872; Seal Type:Single Lip; Bearing Insert Material:Steel; Ring Size:Standard; |
| AMI UCC310-31 Cartridge Unit Bearings | C:52.5 kN; T max.:100 °C; L:240 mm; Designation of closed end cover:SCC212; G:R1/8"; Recommended tightening torque for set screw:16.8 Nm; N:18mm; J:190 mm; C0:32.8 kN; T min.:-20 °C; |
| AMI UCC203 Cartridge Unit Bearings | d:42.86 mm; Designation of housing:PLE209N-; A:54 mm; H1:18.4 mm; L:197.5 mm; H:52.4 mm; C0:20.8 kN; H2:106.4 mm; B:49.2 mm; S:19 mm; |
| AMI UEC206-18 Cartridge Unit Bearings | H:55.6 mm; T min.:-20 °C; A:55 mm; H1:19.3 mm; A1:36 mm; H2:114 mm; T max.:100 °C; Designation of housing:PLE210N-; d:50 mm; B:51.6 mm; |
| AMI UCC205-14 Cartridge Unit Bearings | L:206 mm; A1:39 mm; Designation of housing:P210-; T min.:-20 °C; d:49.21 mm; C0:23.2 kN; Designation of bearing:US210-31G2; N:20mm; H2:114 mm; N1:25 mm; |
| AMI UCC206-17 Cartridge Unit Bearings | Designation of bearing:SES210; d:50 mm; A2:55.7 mm; C:27.5 kN; d1:69.9 mm; T min.:-20 °C; Designation of open end cover:SCOE210-50; s1:33.4 mm; N:17.5mm; C0:23.7 kN; |
| AMI UGC307-23 Cartridge Unit Bearings | Characteristic rolling element frequency, BSF:5.79 Hz; D:85 mm; Characteristic outer ring frequency, BPF0:6.24 Hz; d1:59 mm; Mass (without HJ ring):0.56 kg; D1:73.3 mm; Static load, C0:87 kN; Characteristic inner ring frequency, BPFI:8.76 Hz; B:23 mm; Brand:SNR; |
| AMI UCC212 Cartridge Unit Bearings | A:27 mm; G:M6x1; Dz:60 mm; C0:7.88 kN; e:16 mm; N:16mm; Designation of open end cover:SCO205-25; H:130 mm; Recommended tightening torque for set screw:5.5 Nm; B:34 mm; |
| AMI UCC321 Cartridge Unit Bearings | Bearing Inner Ring Material:Steel; Brand:Baldor-Dodge; Flinger Type:None; End Cap Groove:No; Max Bearing Speed:5500 rpm; Anti-Rotation Pin:Yes; Bearing Series:207 Series; Housing Coating:Powder Coat; Bearing Outer Ring Material:Steel; Manufacturing Plant Location:Rogersville, TN; |
| AMI UCC203-11 Cartridge Unit Bearings | S:14.9 mm; Designation of bearing:US212-39G2T20; H2:140 mm; B:53.7 mm; C:52.5 kN; G:R1/8"; Designation of housing:PE212N-; N:18mm; T max.:200 °C; L1:71 mm; |
| AMI UEC206 Cartridge Unit Bearings | Seal Type:Single Lip; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Ring Size:Standard; Ship Weight:1.62 LB; Bearing Locking Device:Setscrew; Flinger Type:Rubberized; Housing Material:Cast Iron; Flinger Material:Steel; Retainer Type:Std Retainer; |
| AMI UGC310 Cartridge Unit Bearings | T max.:100 °C; G:M10x1; Recommended tightening torque for set screw:33 Nm; N1:31 mm; L:310 mm; C0:63.8 kN; A:83 mm; Designation of bearing:UC217G2L3; N:25mm; T min.:-20 °C; |