| AMI KHRRCSM205 Cartridge Unit Bearings | T min.:-20 °C; T max.:200 °C; J:64 mm; B:22 mm; e:15 mm; Designation of housing:F203N-; C0:4.78 kN; Z:36.3 mm; A2:31 mm; C:9.55 kN; |
| AMI UCLCX07-20 Cartridge Unit Bearings | Fatigue limit load, Cu:0.37 kN; r1a max:0.6 mm; Dynamic load, C:9.9 kN; da min:40.5 mm; rs min:1 mm; D:62 mm; Max operating temperature, Tmax:120 °C; Mass:0.15 kg; Brand:SNR; Axial rigidity:125 N/µm; |
| AMI UCC312-39 Cartridge Unit Bearings | Weight:0.8 kg; B:31 mm; G:M6x1; N1:16 mm; A2:21 mm; L1:61 mm; L:94 mm; SW:3 mm; N:19mm; L2:10 mm; |
| AMI UCC203-11 Cartridge Unit Bearings | S:14.9 mm; Designation of bearing:US212-39G2T20; H2:140 mm; B:53.7 mm; C:52.5 kN; G:R1/8"; Designation of housing:PE212N-; N:18mm; T max.:200 °C; L1:71 mm; |
| AMI UGC314-43 Cartridge Unit Bearings | Bearing Outer Ring Material:Steel; Shaft Attachment (2):Eccentric Collar; Max Bearing Speed:6500 rpm; End Cap Groove:No; Ship Weight:1.07 LB; Ball Grade:Class 10; Bearing Series:206 Series; Seal Type:Single Lip; Housing Type:2 Bolt Light Duty Fl; Self Aligning:Self Centering; |
| AMI UCLCX06 Cartridge Unit Bearings | Designation of open end cover:SCO209-45; N:M14; E:25 mm; S:10.2 mm; d:45 mm; T max.:100 °C; Designation of bearing:US209G2; A:60 mm; C:31.85 kN; L1:42 mm; |
| AMI UCC315-47 Cartridge Unit Bearings | e:29 mm; Designation of housing:FA212N-; d:60 mm; J1:92 mm; Designation of open end cover:SCO212-60; A2:68.7 mm; C:52.5 kN; Recommended tightening torque for set screw:22 Nm; A:48 mm; Designation of bearing:UC212G2; |
| AMI UCC207-21 Cartridge Unit Bearings | C:25.7 kN; s1:36.3 mm; Recommended tightening torque for set screw:8 Nm; B:37.6 mm; Designation of bearing:EX207-21G2L4; A5:18.8 mm; S:18.8 mm; C0:15.2 kN; H:90 mm; d1:51.1 mm; |
| AMI UCLCX07 Cartridge Unit Bearings | A:38 mm; s1:11 mm; H2:97 mm; A1:19 mm; G:M6x1; S:6 mm; C0:4.78 kN; N1:16 mm; T max.:100 °C; Designation of housing:PH203-; |
| AMI UCLCX06-18 Cartridge Unit Bearings | Nlim (grease):8,400 rpm; d:50 mm; da min:55 mm; Characteristic rolling element frequency, BSF:7.31 Hz; ra max:1 mm; Static load, C0:16.6 kN; Radial clearance class:C4; Mass:0.26 kg; Max operating temperature, Tmax:120 °C; Dynamic load, C:21.8 kN; |
| AMI UCC206-19 Cartridge Unit Bearings | C0:11.2 kN; Designation of housing:PA206N-; S:15.9 mm; H:42.9 mm; G:M6x1; H2:84 mm; s1:19.05 mm; H1:13 mm; d:31.75 mm; Z:18 mm; |
| AMI UCC206-20 Cartridge Unit Bearings | Da max:57 mm; Min operating temperature, Tmin:-25 °C; Brand:NTN; Characteristic outer ring frequency, BPF0:4.6 Hz; Dynamic load, C:16 kN; Characteristic cage frequency, FTF:0.42 Hz; Radial clearance class:C2; D:62 mm; da max:42 mm; ra max:1 mm; |
| AMI UCLCX06-19 Cartridge Unit Bearings | S:19 mm; Designation of bearing:SUC210-31; J:101.6 mm; T min.:-20 °C; Recommended tightening torque for set screw:18.7 Nm; d:49.21 mm; Weight:2.77 kg; H:57.2 mm; H1:13 mm; B:51.6 mm; |
| AMI UCC313-40 Cartridge Unit Bearings | G:R1/8"; J:82.5 mm; A1:12 mm; A:33.5 mm; T min.:-20 °C; T max.:200 °C; Dz:70 mm; L:108 mm; Weight:1.12 kg; N:11,5mm; |
| AMI UCLCX09-26 Cartridge Unit Bearings | Mass:0.47 kg; B:24.61 mm; Characteristic rolling element frequency, BSF:6 Hz; d:34.92 mm; Nlim (oil):7,100 rpm; e:0.29; Characteristic cage frequency, FTF:0.42 Hz; Y2:2.07; Dynamic load, C:71 kN; Min operating temperature, Tmin:-40 °C; |
| AMI UGC309 Cartridge Unit Bearings | Grease Type:Unirex N2; d:30.0000 in; Bearing Insert Material:Steel; Housing Material:Cast Iron; Ring Size:Standard; Bearing Duty:Normal Duty; Flinger Type:Non-Rubberized; Shaft Attachment (2):Grip Tight; Bearing Series:207 Series; Bearing Inner Ring Material:Steel; |