| CONSOLIDATED BEARING 10406 C/3 Self Aligning Ball Bearings | A1:21.6 mm; Designation of housing:PP205-; L:108 mm; C:14 kN; J:86 mm; d:22.22 mm; N:11mm; Weight:0.28 kg; A:31.7 mm; H:28.6 mm; |
| SKF 2205 E-2RS1KTN9/W64 Self Aligning Ball Bearings | H:95.2 mm; A2:19.5 mm; B:27 mm; d:22.22 mm; Designation of housing:PFT205-; A1:4 mm; Designation of bearing:US205-14G2T04; S:7.5 mm; s1:13.5 mm; J:76 mm; |
| SKF 1317/C3 Self Aligning Ball Bearings | r - Cup Backface To Clear Radius1:1.5 mm; Series:33016; G2 - Heat Generation Factor (Rib-Roller End):49.4; Cup Part Number:Y33016M; D:125 mm; Db - Cup Backface Backing Diameter:115 mm; C - Cup Width:29.5 mm; Design Units:METRIC; e - ISO Factor3:0.28; K - Factor2:2.1; |
| CONSOLIDATED BEARING 10409 Self Aligning Ball Bearings | ra max:1 mm; Category:Single Row Ball Bear; Product Group:B00308; B:19 mm; Inventory:0.0; UNSPSC:31171504; Mass:0.4 kg; Outside Diameter:3.346 Inch | 85 Mill; Characteristic cage frequency, FTF:0.4 Hz; |
| CONSOLIDATED BEARING 11504 Self Aligning Ball Bearings | T min.:-20 °C; C:25.7 kN; Designation of bearing:US207-22G2; S:8.5 mm; B:32 mm; s1:16 mm; A2:23.5 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; d:34.92 mm; |
| SKF 2208E Self Aligning Ball Bearings | C:14 kN; A:27 mm; A1:7 mm; T min.:-20 °C; A2:29.5 mm; L:115 mm; s1:13.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:10 mm; C0:7.88 kN; |
| SKF 2204 ETN9/W64F Self Aligning Ball Bearings | L1:65 mm; T max.:100 °C; H:57.2 mm; N1:25 mm; Dz:100 mm; A:60 mm; C:35.1 kN; B:43.5 mm; J:159 mm; C0:23.2 kN; |
| SKF 1212 EKTN9/W64 Self Aligning Ball Bearings | Recommended tightening torque for set screw:8 Nm; H1:19 mm; S:17.5 mm; L1:54 mm; L:167 mm; s1:21.45 mm; N1:21 mm; C0:15.2 kN; H:47.6 mm; Weight:1.73 kg; |
| CONSOLIDATED BEARING 1201 C/3 Self Aligning Ball Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:952 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:2710 lbf; Design Units:Imperial; Cone Part Number:05062; G1 - Heat Generation Factor (Roller-Raceway)11:5.8; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:0.07 in; T - Bearing Width across Cones:1.2499 in; G2 - Heat Generation Factor (Rib-Roller End):5.55; |
| CONSOLIDATED BEARING 2307-K C/3 Self Aligning Ball Bearings | overall width:1.0039 in; d:15 mm; F:18 mm; da min:17 mm; rs min:0.3 mm; Mass:0.02 kg; Lubrication hole on inner ring:Non/No; Brand:NTN; t:1.5 mm; inside diameter:0.5906 in; |
| CONSOLIDATED BEARING 10407 Self Aligning Ball Bearings | T min.:-20 °C; A:48 mm; N:23mm; B:40 mm; Adapter sleeve reference:H2310-27; d:42.86 mm; Weight:4.98 kg; J:132 mm; G:M6x1; B1:55 mm; |
| SKF 1209 EKTN9/C3W64 Self Aligning Ball Bearings | Characteristic rolling element frequency, BSF:6.21 Hz; Characteristic cage frequency, FTF:0.42 Hz; Number of lubrication holes:3; Associated sleeve reference:H3126; D:230 mm; Max operating temperature, Tmax:200 °C; Nref:2,800 rpm; Nlim:3,600 rpm; Y1:2.69; Da max:216 mm; |
| SKF 2207E Self Aligning Ball Bearings | b:11 mm; ra max:2 mm; Y1:2.09; Associated sleeve reference:H2324; da min:132 mm; Ce min:17 mm; Static load, C0:998 kN; Brand:SNR; Radial clearance class:CN; Fatigue limit load, Cu:72.4 kN; |
| CONSOLIDATED BEARING 2308 M Self Aligning Ball Bearings | C:113.36 kN; S:37.3 mm; d:74.61 mm; B1:100 mm; L:236 mm; Recommended tightening torque for set screw:54.5 Nm; Designation of housing:FS315-; G:M10x1; T max.:100 °C; C0:76.8 kN; |
| TIMKEN 1308S Self Aligning Ball Bearings | J:157 mm; A:40 mm; B:43.5 mm; J1:76 mm; Designation of housing:FA210-; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; Designation of bearing:US210-30G2T04; T min.:-40 °C; C0:23.2 kN; |
| SKF 1218/W64 Self Aligning Ball Bearings | Y1 - ISO Factor5:1.44; e - ISO Factor4:0.47; r - Cup Frontface To Clear Radius2:0.06 in; Series:94000; Y - ISO Factor1:1.28; Design Units:Imperial; C - Double Cup Width:5.5000 in; K - Factor3:1.25; Da - Cup Frontface Backing Diameter:11.02 in; Y2 - ISO Factor6:2.15; |