| SKF 1212 EKTN9/W64 Self Aligning Ball Bearings | Recommended tightening torque for set screw:8 Nm; H1:19 mm; S:17.5 mm; L1:54 mm; L:167 mm; s1:21.45 mm; N1:21 mm; C0:15.2 kN; H:47.6 mm; Weight:1.73 kg; |
| SKF 126 TN9/W64 Self Aligning Ball Bearings | Y2 - Geometry Factor:4.40; Dimension SA:3.13 in; Dimension M:2 in; Shaft Size :2-3/16 in; Pre Install Clearance Max:0.0026 in; Dimension L:3.29 in; Grease Lubrication - M/N Seal:2200 rpm; C0 - Static Load:31900 lb; Shaft Size Type:Imperial; Locking Style:Single Concentric; |
| CONSOLIDATED BEARING 2307 Self Aligning Ball Bearings | d:20 mm; Category:Single Row Ball Bear; Weight / LBS:0.14991; Fatigue limit load, Cu:0.23 kN; Enclosure:2 Seals; Min operating temperature, Tmin:-25 °C; ra max:0.6 mm; Long Description:20MM Bore; 42MM Outs; rs min:0.6 mm; |
| SKF 2205 E-2RS1KTN9/W64 Self Aligning Ball Bearings | H:95.2 mm; A2:19.5 mm; B:27 mm; d:22.22 mm; Designation of housing:PFT205-; A1:4 mm; Designation of bearing:US205-14G2T04; S:7.5 mm; s1:13.5 mm; J:76 mm; |
| CONSOLIDATED BEARING 11504 Self Aligning Ball Bearings | T min.:-20 °C; C:25.7 kN; Designation of bearing:US207-22G2; S:8.5 mm; B:32 mm; s1:16 mm; A2:23.5 mm; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; d:34.92 mm; |
| SKF 1209 EKTN9/C3W64 Self Aligning Ball Bearings | Characteristic rolling element frequency, BSF:6.21 Hz; Characteristic cage frequency, FTF:0.42 Hz; Number of lubrication holes:3; Associated sleeve reference:H3126; D:230 mm; Max operating temperature, Tmax:200 °C; Nref:2,800 rpm; Nlim:3,600 rpm; Y1:2.69; Da max:216 mm; |
| CONSOLIDATED BEARING 11305 Self Aligning Ball Bearings | Da max:30 mm; f0:13.9; Inventory:0.0; Radial clearance class:C3; Manufacturer Name:NTN; B:9 mm; Brand:NTN; Characteristic rolling element frequency, BSF:4.73 Hz; Characteristic outer ring frequency, BPF0:3.59 Hz; Dynamic load, C:5.6 kN; |
| CONSOLIDATED BEARING 11508 Self Aligning Ball Bearings | C:19.5 kN; N:12mm; L:125 mm; G:M6x1; C0:11.2 kN; A:31 mm; A2:32.2 mm; T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm; Z:44.4 mm; |
| CONSOLIDATED BEARING 2308 C/2 Self Aligning Ball Bearings | A4:29 mm; Weight:0.75 kg; Designation of housing:FLZ205-; B1:44.3 mm; Recommended tightening torque for set screw:3.7 Nm; A1:12 mm; B:34.8 mm; G:R1/8"; d1:37.4 mm; Designation of bearing:EX205-15G2L4; |
| SKF 1211 EKTN9/C3W64 Self Aligning Ball Bearings | r - Cup Backface To Clear Radius1:0.130 in; e - ISO Factor2:0.35; Da - Cup Frontface Backing Diameter:4.56 in; Cg - Geometry Factor:0.111; Db - Cup Backface Backing Diameter:4.25 in; C - Cup Width:1.1875 in; D:4.8125 in; Y - ISO Factor3:1.73; Cup Part Number:553X; Design Units:Imperial; |
| SKF 1304E Self Aligning Ball Bearings | A:38 mm; B1:38 mm; J:105 mm; Adapter sleeve reference:HLK2309; Z:33.4 mm; s1:23.2 mm; B:22 mm; C0:22.4 kN; C:33.2 kN; e:22 mm; |
| CONSOLIDATED BEARING 2306 P/6 Self Aligning Ball Bearings | N:12mm; A4:20.5 mm; B:25 mm; A2:28 mm; Weight:0.66 kg; d:20 mm; S:7 mm; A1:6 mm; Dz:54 mm; T min.:-20 °C; |
| CONSOLIDATED BEARING 10406 Self Aligning Ball Bearings | Designation of open end cover:SCOU212-39; Recommended tightening torque for set screw:16.8 Nm; SW:4.76 mm; P:300 mm; T min.:-20 °C; s1:32.55 mm; d:61.91 mm; Weight:1.59 kg; Designation of bearing:UC212-39G2T20; A5:39.7 mm; |
| CONSOLIDATED BEARING 2303 C/3 Self Aligning Ball Bearings | L1:121.00 mm; C:23 mm; D3:165 mm; Locknut:KM26; Lockwasher and Lockplates:MB26; G:M130x2; Weight:4.55 Kg; d1:4 1/2 in; Appropriate Hydraulic Nut:HMV26; |
| CONSOLIDATED BEARING 10409 C/3 Self Aligning Ball Bearings | C90 - Dynamic Radial Rating (90 million revolutions)4:2500 lbf; Aa - Cage-Cone Backface Clearance:1.8 mm; Da - Cup Frontface Backing Diameter:44.50 mm; Ab - Cage-Cone Frontface Clearance:1.5 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:9630 lbf; Cg - Geometry Factor:0.0452; da - Cone Frontface Backing Diameter:24.89 mm; C0 - Static Radial Rating:9100 lbf; C - Cup Width:14.288 mm; Series:09000; |
| CONSOLIDATED BEARING 11209 Self Aligning Ball Bearings | Recommended tightening torque for set screw:11.5 Nm; C:35.1 kN; N1:23 mm; Z:91.5 mm; d1:67.2 mm; s1:33.4 mm; L:200 mm; L1:61 mm; Designation of housing:PE210N-; T max.:100 °C; |