| SKF 1211E Self Aligning Ball Bearings | SDM_:157.491; hidTable:ecat_NSANGB; D_:215; DE_:194.216; C_conv:335000; SRI:18.99; mass:14.58; ALP21:30; da:114; DA_:36.512; |
| CONSOLIDATED BEARING 1203 P/6 Self Aligning Ball Bearings | Maximum Speed:1320 rpm; Dimension H2:16.9 in; Cr - Dynamic Load Rating:131064 lbf; Note:This product line wa; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M:7.0 in; Bearing Type:Split Cylindrical Ex; Cor - Static Load Rating:178049 lbf; Series Type:Light Series; Seal Type:Viton Single Lip; |
| CONSOLIDATED BEARING 10408 Self Aligning Ball Bearings | Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:116000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:66600 lbf; Series:HH231600; Ab - Cage-Cone Frontface Clearance:0.09 in; B - Double Cone Width:6.2500 in; da - Cone Frontface Backing Diameter:6.75 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:36300 lbf; Cage Type:Stamped Steel; |
| CONSOLIDATED BEARING 11211 Self Aligning Ball Bearings | N:25mm; C:62 kN; J:187 mm; G:M6x1; s1:30.5 mm; T max.:100 °C; Weight:4.14 kg; H:240 mm; B:61 mm; A2:67 mm; |
| CONSOLIDATED BEARING 1203 C/3 Self Aligning Ball Bearings | Recommended tightening torque for set screw:8 Nm; SW:3.97 mm; Weight:0.8 kg; T min.:-20 °C; m:9.2 mm; G:5/16-24UNF; d:47.62 mm; r:1.1; S:10.9 mm; C0:23.2 kN; |
| SKF 1209 EKTN9/C3W64 Self Aligning Ball Bearings | Characteristic rolling element frequency, BSF:6.21 Hz; Characteristic cage frequency, FTF:0.42 Hz; Number of lubrication holes:3; Associated sleeve reference:H3126; D:230 mm; Max operating temperature, Tmax:200 °C; Nref:2,800 rpm; Nlim:3,600 rpm; Y1:2.69; Da max:216 mm; |
| CONSOLIDATED BEARING 10406 Self Aligning Ball Bearings | Designation of open end cover:SCOU212-39; Recommended tightening torque for set screw:16.8 Nm; SW:4.76 mm; P:300 mm; T min.:-20 °C; s1:32.55 mm; d:61.91 mm; Weight:1.59 kg; Designation of bearing:UC212-39G2T20; A5:39.7 mm; |
| CONSOLIDATED BEARING 11209 Self Aligning Ball Bearings | Recommended tightening torque for set screw:11.5 Nm; C:35.1 kN; N1:23 mm; Z:91.5 mm; d1:67.2 mm; s1:33.4 mm; L:200 mm; L1:61 mm; Designation of housing:PE210N-; T max.:100 °C; |
| CONSOLIDATED BEARING 11510 Self Aligning Ball Bearings | Shaft Size:115 mm; Dimension L:18.3 in; Cor - Static Load Rating:95993 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; Bolt Size:2 x M24; Dimension H:5.630 in; Seal Type:Felt Type; Bearing Type:Split Cylindrical Ex; Note:This product line wa; Support Type:Two-Bolt Plummer Blo; |
| SKF 2207 ETN9/C4 Self Aligning Ball Bearings | G:M6x1; A1:28 mm; H2:130 mm; T max.:100 °C; Designation of housing:PH206N-; A:50 mm; Z:19 mm; J:121 mm; L1:56 mm; C:19.5 kN; |
| CONSOLIDATED BEARING 2304 Self Aligning Ball Bearings | Brand:SNR; Mass:0.08 kg; D:42 mm; Min operating temperature, Tmin:-40 °C; Nref:17,000 rpm; rs min:1 mm; Da max:37 mm; d:15 mm; Static load, C0:5.4 kN; ra max:1 mm; |
| CONSOLIDATED BEARING 2308 M C/3 Self Aligning Ball Bearings | ra max:1 mm; Fatigue limit load, Cu:14.5 kN; Nlim:9,100 rpm; B:23 mm; Brand:SNR; Static load, C0:124 kN; Dynamic load, C:130 kN; D:90 mm; Characteristic rolling element frequency, BSF:6.34 Hz; Y2:4.23; |
| SKF 1219/C3 Self Aligning Ball Bearings | H:90 mm; C0:11.5 kN; C:22.36 kN; d1:42.8 mm; B:34.9 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.03 kg; T min.:-20 °C; T max.:100 °C; A3:2.5 mm; |
| TIMKEN 1308S Self Aligning Ball Bearings | J:157 mm; A:40 mm; B:43.5 mm; J1:76 mm; Designation of housing:FA210-; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; Designation of bearing:US210-30G2T04; T min.:-40 °C; C0:23.2 kN; |
| SKF 1214 ETN9/W64 Self Aligning Ball Bearings | Design Units:Imperial; Cup Part Number:HM905810; Series:HM905800; Db - Cup Backface Backing Diameter:3.39 in; e - ISO Factor2:0.78; Cg - Geometry Factor:0.116; Da - Cup Frontface Backing Diameter:3.96 in; C - Cup Width:0.9200 in; Y - ISO Factor3:0.77; D:4.1333 in; |
| SKF 1304E Self Aligning Ball Bearings | A:38 mm; B1:38 mm; J:105 mm; Adapter sleeve reference:HLK2309; Z:33.4 mm; s1:23.2 mm; B:22 mm; C0:22.4 kN; C:33.2 kN; e:22 mm; |