| CONSOLIDATED BEARING 10407 M Self Aligning Ball Bearings | Designation of housing:PLE203N-; J:88.5 mm; N1:14 mm; C:9.55 kN; T min.:-40 °C; N:11mm; A:30 mm; G:M6x1; Recommended tightening torque for set screw:3.2 Nm; B:22 mm; |
| CONSOLIDATED BEARING 2308E-K 2RS C/3 Self Aligning Ball Bearings | K - Factor7:1.29; C - Cup Width:17.463 mm; G1 - Heat Generation Factor (Roller-Raceway):20.6; B - Cone Width:22.225 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; D:80.963 mm; Design Units:Imperial; da - Cone Frontface Backing Diameter:39.62 mm; a - Effective Center Location3:-3.8 mm; Ab - Cage-Cone Frontface Clearance:3.1 mm; |
| CONSOLIDATED BEARING 11207 Self Aligning Ball Bearings | Oil Holes in Retainer:No; B:0.7874 in; d - Bore Diameter:1.7907 in; R - Fillet Radius Shaft (Max):0.03 in; D - Bearing O.D.:2.8740 in; Steering Pivot Rating:10700 lbf; Bearing Type:Thrust Tapered Rolle; Weight:0.7 lb; |
| CONSOLIDATED BEARING 1200 C/3 Self Aligning Ball Bearings | N1:25 mm; s1:24.6 mm; C:29.6 kN; L1:58 mm; S:19 mm; J:137 mm; H:100 mm; d:38.1 mm; C0:18.2 kN; G:M6x1; |
| SKF 2209 EKTN9/C3W64F Self Aligning Ball Bearings | r:1.5; d1:82 mm; S:30.9 mm; m:8 mm; G:3/8-24UNF; SW:4.76 mm; T min.:-20 °C; B1:77.7 mm; B2:22.3 mm; C:27 mm; |
| SKF 2208 ETN9/W64 Self Aligning Ball Bearings | Designation of housing:PG207N-; Recommended tightening torque for set screw:8 Nm; A:48 mm; Dz:80 mm; B:42.9 mm; H1:20 mm; s1:21.45 mm; J:68 mm; Designation of bearing:UC207-23G2L4; G:M6x1; |
| SKF 2208 E-2RS1TN9/C3 Self Aligning Ball Bearings | C0:6.65 kN; H:89 mm; L:94 mm; C:12.8 kN; S:17 mm; B:34 mm; A5:17 mm; Designation of open end cover:SCOE204-17; G:M6x1; N:19mm; |
| ROLLWAY BEARING 2206 K 2RS Self Aligning Ball Bearings | DE_:335; d:260; mass:31.1; ra max:2; Fw:289; dc min:295; hidTable:ecat_NSCLDRD; GRS rpm:1400; SDM_:312; D_a max:349; |
| CONSOLIDATED BEARING 2307 C/3 Self Aligning Ball Bearings | Min operating temperature, Tmin:-20 °C; D1:92.5 mm; Da max:101 mm; Characteristic cage frequency, FTF:0.4 Hz; da max:63 mm; D:110 mm; ra max:2 mm; Characteristic outer ring frequency, BPF0:5.22 Hz; Radial clearance class:CN; da min:59 mm; |
| CONSOLIDATED BEARING 2307E-K 2RS Self Aligning Ball Bearings | C90 - Dynamic Radial Rating (90 million revolutions)5:3490 lbf; Cg - Geometry Factor:0.0606; Ab - Cage-Cone Frontface Clearance:0.07 in; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:0.06 in; Cone Part Number:15102; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:6080 lbf; G2 - Heat Generation Factor (Rib-Roller End):10; C0 - Static Radial Rating:12100 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:23400 lbf; |
| CONSOLIDATED BEARING 10406 Self Aligning Ball Bearings | Designation of open end cover:SCOU212-39; Recommended tightening torque for set screw:16.8 Nm; SW:4.76 mm; P:300 mm; T min.:-20 °C; s1:32.55 mm; d:61.91 mm; Weight:1.59 kg; Designation of bearing:UC212-39G2T20; A5:39.7 mm; |
| CONSOLIDATED BEARING 10408 Self Aligning Ball Bearings | Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:116000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:66600 lbf; Series:HH231600; Ab - Cage-Cone Frontface Clearance:0.09 in; B - Double Cone Width:6.2500 in; da - Cone Frontface Backing Diameter:6.75 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:36300 lbf; Cage Type:Stamped Steel; |
| SKF 1212 EKTN9/W64 Self Aligning Ball Bearings | Recommended tightening torque for set screw:8 Nm; H1:19 mm; S:17.5 mm; L1:54 mm; L:167 mm; s1:21.45 mm; N1:21 mm; C0:15.2 kN; H:47.6 mm; Weight:1.73 kg; |
| SKF 2314/W64 Self Aligning Ball Bearings | Cup Part Number:L44613; a - Effective Center Location3:-3.3 mm; Ab - Cage-Cone Frontface Clearance:1.3 mm; B:15.011 mm; e - ISO Factor8:0.37; G2 - Heat Generation Factor (Rib-Roller End):8.93; B - Cone Width:14.732 mm; Series:L44600; C1 - Dynamic Radial Rating (1 million revolutions)5:8010 lbf; C0 - Static Radial Rating:7400 lbf; |
| SKF 1210 EKTN9/C3W64 Self Aligning Ball Bearings | H2:64 mm; L3:64 mm; d1:52 mm; N1:16 mm; A2:30 mm; Adapter sleeve reference:H2307-18; T max.:100 °C; C0:15.2 kN; Designation of bearing:UK207G2H-18; A1:12 mm; |
| SKF 2205 E-2RS1KTN9/W64 Self Aligning Ball Bearings | H:95.2 mm; A2:19.5 mm; B:27 mm; d:22.22 mm; Designation of housing:PFT205-; A1:4 mm; Designation of bearing:US205-14G2T04; S:7.5 mm; s1:13.5 mm; J:76 mm; |