| No. | Brand | D | d | P | b | C | Z | L | S |
| 2303-2RS C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | 111 mm | - |
| 2204 E-2RS1TN9/W64 | SKF | - | 38.1 mm | - | - | - | 23.5 mm | - | 19 mm |
| 2204 E-2RS1TN9/GFF | SKF | - | - | - | - | - | - | - | - |
| 1203 C/3 | CONSOLIDATED BEARING | - | 47.62 mm | - | - | - | - | - | 10.9 mm |
| 1220/W64 | SKF | - | - | - | - | - | - | - | - |
| 1200 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 2306-K C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | 2.859 in |
| 2208E | SKF | - | - | - | - | 14 kN | - | 115 mm | - |
| 1202 C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 10405 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 2208 ETN9/W64 | SKF | - | - | - | - | - | - | - | - |
| 11204 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 2306-K 2RS C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 11504 | CONSOLIDATED BEARING | - | 34.92 mm | - | - | 25.7 kN | - | - | 8.5 mm |
| 1200 C/3 | CONSOLIDATED BEARING | - | 38.1 mm | - | - | 29.6 kN | - | - | 19 mm |
| 2307 M P/6 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 2307 C/2 | CONSOLIDATED BEARING | - | 34.92 mm | - | - | - | - | 167 mm | - |
| 2306 C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 2306 M P/6 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 2205 E-2RS1KTN9/W64 | SKF | - | 22.22 mm | - | - | - | - | - | 7.5 mm |
| CONSOLIDATED BEARING 2307E-K C/3 Self Aligning Ball Bearings | Bolt Size:4 x M12; Note:This product line wa; Dimension N:5.375 in; Support Type:Round Flange; Cor - Static Load Rating:19558 lbf; Dimension H:2.2 in; Cr - Dynamic Load Rating:18659 lbf; Bearing Type:Split Cylindrical Re; Dimension L:4.1 in; Dimension R:7.1 in; |
| CONSOLIDATED BEARING 1202 Self Aligning Ball Bearings | G1 - Heat Generation Factor (Roller-Raceway):75.8; Db - Cup Backface Backing Diameter:129.03 mm; Cg - Geometry Factor:0.0873; Y - ISO Factor4:0.73; Da - Cup Frontface Backing Diameter:141.99 mm; Cup Part Number:Y31314M; C - Cup Width:25.000 mm; D:150 mm; G2 - Heat Generation Factor (Rib-Roller End):29.5; e - ISO Factor3:0.83; |
| CONSOLIDATED BEARING 11212 Self Aligning Ball Bearings | Backing Housing Diameter Ds:794.0 mm; Thermal Speed Ratings - Oil:270 rpm; Backing Shaft Diameter ds:691.0 mm; Weight:804.700 lb; Lubrication Groove g:25.3 mm; Width B:218.000 mm; Chamfer rsmin:6.00 mm; Number of Lubrication Holes:16; DUR/DOR F/E:704.000 mm; Bore d:630.000 mm; |
| SKF 2207 ETN9/C4 Self Aligning Ball Bearings | G:M6x1; A1:28 mm; H2:130 mm; T max.:100 °C; Designation of housing:PH206N-; A:50 mm; Z:19 mm; J:121 mm; L1:56 mm; C:19.5 kN; |
| CONSOLIDATED BEARING 2308E-2RS Self Aligning Ball Bearings | T max.:200 °C; Weight:14 kg; L:327 mm; N:27mm; H2:200 mm; L1:100 mm; A1:55 mm; d:88.9 mm; C0:71.5 kN; T min.:-20 °C; |
| CONSOLIDATED BEARING 11506 Self Aligning Ball Bearings | A:32 mm; SW:3.97 mm; B1:51.1 mm; Designation of housing:EHE207-; A5:18.8 mm; E:24 mm; L1:76 mm; L3:40 mm; Weight:1.28 kg; A2:40 mm; |
| CONSOLIDATED BEARING 2306 M P/6 Self Aligning Ball Bearings | Dimension P:0.8 in; Dimension D:8.0 in; Dimension S:1.5 in; Bearing UPC:013992031686; Series Type:Medium Series; Dimension B:5.0 in; Tensioning Unit Type:Tension Type; Dimension X:0.9 in; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:27202 lbf; |
| CONSOLIDATED BEARING 2306-K Self Aligning Ball Bearings | G:R1/8"; L1:71 mm; d:50 mm; B:55.6 mm; Recommended tightening torque for set screw:22 Nm; C:43.55 kN; J:170.5 mm; Designation of bearing:UCX10G2; Designation of housing:PEX10-; T min.:-20 °C; |
| CONSOLIDATED BEARING 2308 M P/6 C/3 Self Aligning Ball Bearings | Dimension M:240 mm; Maximum Speed:1070 rpm; Cor - Static Load Rating:222561 lbf; Cr - Dynamic Load Rating:138033 lbf; Dimension H2:457 mm; Dimension J:540 mm; Bearing Type:Split Cylindrical Ex; Seal Type:Kevlar Packing Seal; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension L:640 mm; |
| CONSOLIDATED BEARING 11204 Self Aligning Ball Bearings | Housing Style:Take-Up; Dimension P:1.374 in; Dimension T:0.874 in; Weight:3.21 lb; Total Length L:102.4 mm; Slot Length L3:57.2 mm; Slot Width A1:13.5 mm; Shaft Length L1:67.5 mm; Shaft Size d:15/16 in; Pitch Height H1:76.2 mm; |
| CONSOLIDATED BEARING 10408 Self Aligning Ball Bearings | Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:116000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:66600 lbf; Series:HH231600; Ab - Cage-Cone Frontface Clearance:0.09 in; B - Double Cone Width:6.2500 in; da - Cone Frontface Backing Diameter:6.75 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:36300 lbf; Cage Type:Stamped Steel; |
| CONSOLIDATED BEARING 10405 M Self Aligning Ball Bearings | Oil Holes in Retainer:No; Weight:2.2 lb; R - Fillet Radius Shaft (Max):0.03 in; D - Bearing O.D.:4.3750 in; Bearing Type:Thrust Tapered Rolle; Steering Pivot Rating:27900 lbf; d - Bore Diameter:2.5100 in; B:1.0156 in; |
| CONSOLIDATED BEARING 10406 Self Aligning Ball Bearings | Designation of open end cover:SCOU212-39; Recommended tightening torque for set screw:16.8 Nm; SW:4.76 mm; P:300 mm; T min.:-20 °C; s1:32.55 mm; d:61.91 mm; Weight:1.59 kg; Designation of bearing:UC212-39G2T20; A5:39.7 mm; |
| CONSOLIDATED BEARING 1201 C/3 Self Aligning Ball Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:952 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:2710 lbf; Design Units:Imperial; Cone Part Number:05062; G1 - Heat Generation Factor (Roller-Raceway)11:5.8; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:0.07 in; T - Bearing Width across Cones:1.2499 in; G2 - Heat Generation Factor (Rib-Roller End):5.55; |
| SKF 1216/W64 Self Aligning Ball Bearings | T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; J1:92 mm; G:M6x1; L:140 mm; A1:20 mm; B:53.7 mm; Designation of housing:FA212N-; S:14.9 mm; e:29 mm; |
| SKF 1209 ETN9/W64 Self Aligning Ball Bearings | s1:12.5 mm; Designation of housing:FE204N-; B:25 mm; Z:40.8 mm; T max.:100 °C; A:29.5 mm; G:R1/8"; T min.:-40 °C; L:86 mm; Designation of closed end cover:SCC204; |
SKF 1218/C4 Self Aligning Ball Bearings Video
SKF 1218 K/C4 Large Ball Bearing, Open, Double Row
Part Number, 1218 K/C4. Brand Name, SKF. EAN, 7316570345070. Item Weight, 5.45 pounds. Model Number, 1218 K/C4. Number of Items, 1. UNSPSC Code
Buy SKF 1218 K/C4 Ball Bearing at 3BG Supply Co
Buy SKF 1218 K/C4 Ball Bearing from 3BG Supply. Buy SKF Ball Bearing online from 3BG Supply - We simplify & supply industrial MRO and mechanical power
SKF bearing housings and roller bearing units
C4. Industrial and coastal areas with moderate salinity. Chemical plants, swimming ...... 1218 K. HE 218. FRB 17.5/160. TSN 518 A. ASNH 518-615. 140. 82,55
SKF 1218 K/C4 Self-Aligning Ball Bearing:
Brand Name, SKF. Ean, 0605779381888. Item Weight, 2.4. Model Number, 1218 K/C4. Number of Items, 1. Part Number, 1218 K/C4. UNSPSC Code, 31170000
1218K/C4 - SKF Self-Aligning Bearing - Quality Bearings
This 1218K/C4 bearing is a double row, extra narrow series, metric self aligning bearing with a 1:12 tapered bore, a steel cage and a larger than C3 radial
SKF - 1218 K/C4 - Motion Industries
Buy SKF Self-Aligning Ball Bearings 1218 K/C4 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
Self-aligning ball bearings - 1218
Basic dynamic load rating, C, 57.2, kN. Basic static load rating, C0, 23.6, kN. Fatigue load limit, Pu, 1.08, kN. Reference speed, 8500, r/min. Limiting speed, 5300
Buy Self-aligning ball bearings · 1218 K/C4 · SKF · 90x160x30
1218 K/C4 C4: Stark erhöhte radiale Lagerluft K: Kegelige Bohrung, Kegel 1:12. This article is unfortunately not currently in stock. Simply send us your enquiry
1218K/C4 SKF • ABF Store
1218K/C4 SKF available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
1218/C4-SKF - Bearings R Us
1218/C4 SKF Self-Aligning Ball Bearing will permit angular misalignment of the shaft relative to the housing . 1218/C4 SKF Self-Aligning Ball Bearing size is